Attaining grid parity
In addition to consuming a lot of expensive silicon the traditional wafer route is also labor intensive as it requires quite a bit of wiring and mechanical assembly (which is why most modules by this route are now assembled in China and some even in Bangalore). So, another thrust in reducing the cost of solar modules is to design them to require minimal assembly, the same idea that led to the spectacular success of integrated circuits. To this end continuous roll to roll processes have been developed and put into production, the leading example of which today is the technology developed and used by United Solar (Michigan, USA) to deposit thin films of silicon and silicon-germanium alloys on sheets of stainless steel.
What would come as a surprise to most Indians today is that this technology had its genesis in Calcutta and United Solar of USA is led by Dr. Subhendu Guha with a PhD from Calcutta University!
Compared to the traditional thick silicon wafer solar cells, thin film solar cells consume much less precious semiconductor material and on a per watt basis cost only 60-70 percent as much.
At present, First Solar Corp. of Phoenix AZ, USA, the world's largest thin film solar cell company, uses its proprietary cadmium telluride thin film technology to deposit solar cells on glass sheets and claims the lowest cost in the world ( $ 1.25 per watt ). They will soon ramp their production from 300 MW py to 1 GW py. However, be it silicon or non-silicon ( like Cd Te or CIGS ), in the absolute efficiency scale thin film cells in production are somewhat deficient as due to various unavoidable imperfections in crystal structure, their solar conversion efficiency, seldom exceeds 10 percent, less than half that of the best silicon wafer solar modules.
The production processes are also more sophisticated and thus cost more (turnkey plants made by Applied Materials for thin film silicon cells on glass sheets may cost over 3 million USD per MW py capacity). APSTL, the authors company in Scottsdale, AZ, is developing silicon PV cells that will consume only a fraction as much polysilicon as the traditional wafers yet have conversion efficiencies well above that of thin film cells.
The highest solar conversion efficiency today is produced by cells made of multi-junction compound semiconductors. Spectrolab, located north of LA, makes cells that show efficiency of up to 40 percent (nearly double that of the best silicon wafer cells).
However, due to the slow and exact process used to grow these semiconductors they are extremely expensive ($2/sq. mm of die ) and most frequently can be used only for defense and satellite applications. Mars lander robots, including the one that recently confirmed water in Mars, use these multi-junction solar cells to generate enough electricity to operate a power shovel to dig into the hard Martian soil or run a whole chemistry lab on board!
To make these very expensive multijunction solar cells affordable for commercial applications they need to be integrated with concentrator optics (mirrors with cassegrain optics) with attendant cooling systems as well as sun-tracking devices.
Maintaining competitiveness in Indian solar/PV
The above thumbnail sketch should be enough to convince both government policymakers and entrepreneurs that solar PV is an industry deeply rooted in physics and hardcore sciences and it is no place for those with software/design background to dabble in and mess up.
The long term goal should be to identify strategies to maintain competitiveness in the nascent solar PV industry in India even if to get itself off the ground it first uses standard off the shelf tools and technologies that are available to competitors, e.g., China etc. too.
This requires a policy of continuous improvement in cost and/or performance via technology, to sustain, which requires a capable domestic R&D and hardware base. To this end the government ministries must formulate policies that are well grounded in the technical and business realities of the semiconductor industry worldwide as well as adopt a systems approach. That is, it is not just offering financial incentives to set up semiconductor plants, but simultaneously, finance the development of the missing technical infrastructure for semiconductors, viz training of manpower in physics, materials sciences and construction of semiconductor production and testing equipment.
Research based training/education programs on solar photovoltaics and alternative energy in general should be launched at select Indian universities.
Lastly, a new Semiconductor Hardware Association of India, composed primarily of physicists and hardware engineers (rather than the unqualified software/design type pretenders who have contributed to the wafer fab fiasco), should be created at the earliest so as to co-ordinate the development of the semiconductor hardware manufacturing industry in India with minimum avoidable delays.
The author is the Chief Technical Officer of APSTL llc, of Scottsdale, AZ, USA, a company that specializes in developing key semiconductor technologies and licensing them worldwide.
Tuesday, September 23, 2008
DuPont India Opens Biotech Research Center at DuPont Knowledge Center Hyderabad
DuPont India Opens Biotech Research Center at DuPont Knowledge Center Hyderabad
(Nanowerk News) DuPont India today announced the opening of the first research facility at the DuPont Knowledge Center (DKC) in Hyderabad. The Biotech Research Center begins its operations with more than 80 scientists working on a variety of global research programs on plant and industrial biotechnology. The India center is the first integrated agriculture and industrial biotechnology research center for DuPont outside the USA. The other research facilities at the DKC will come up in phases over the next couple of months, and the complete DuPont Knowledge Center is expected to be formally inaugurated sometime before this year-end.
“The global demand for agricultural crops is very strong. We have the science to help farmers and others across the value chain meet the growing demand and this research center is going to help us do that faster,” said William Niebur, vice president, DuPont Crop Genetics Research and Development and chief scientist at DuPont subsidiary Pioneer Hi-Bred International, while announcing the opening of the center.
The Biotech Research Center at DKC will focus on bringing new crop genetics to the market faster and on application of industrial biotechnology to produce biofuels and biomaterials for global markets. Plant biotech scientists at the DKC will work on developing biotech traits and technologies that will be incorporated into multiple crops for markets the world over. The trait discovery work conducted on site will help create advanced seed products to meet the growing global demand for increased food production, improved animal feed products and expanding energy needs. Research teams will work to deliver new technologies and products for the DuPont Agriculture & Nutrition platform and the DuPont Applied BioSciences business for India and global markets. Both research teams will work together to develop products from renewable resources for food, feed, materials and energy.
Starting with more than - 80 crop genetics and industrial biotech scientists today, DuPont expects the number at the Biotech Research Center to double by year-end. An estimated total of - 600 scientists and - engineers across all disciplines will work out of DKC once it is fully functional.
“By adding biotechnology to DuPont strengths in chemistry and material science, our scientists at DKC will work to develop biocatalysts that will utilize renewable feedstocks to deliver sustainable innovations to global markets,” said John Pierce, Vice President of Technology, DuPont Applied BioSciences, on the occasion of the opening of the Biotech Center at the DKC.
Emphasizing the significance of the DuPont Knowledge Center, Balvinder Kalsi, President and CEO, DuPont India, said, “The DuPont Knowledge Center will provide substantially increased competitiveness to build the future of DuPont and contribute to DuPont India’s growth. I expect DuPont Knowledge Center to be a global Center of Excellence for DuPont. This will enable us to increase our ‘speed to market’ with products that come out of our R&D and Innovations pipeline, not only for India but also for other growth regions”.
The DKC in India is very important to the global R&D and Innovation strategy of DuPont. This center reinforces the importance of India, and the city of Hyderabad, as the emerging center of knowledge excellence, particularly in the new scientific disciplines of biotechnology, bioengineering, bioinformatics, nanotechnology and other emerging sciences. The DKC at Hyderabad will undertake basic research and product application development across all five of the business growth platforms for global and local markets, as well as offer other knowledge services to DuPont businesses.
DuPont today has major plant biotech research centers in Delaware, Iowa and California along with 90 plant genetics research centers around the globe. Globally, DuPont has more than 50 R&D facilities, 20 in the United States and 30 in 11 other nations. DuPont invests an average of $1.3 billion annually on global research and development in a diverse range of technologies for many markets including agriculture, automotive, construction, electronics, chemicals and industrial materials. Today, DuPont has more than 5,000 scientists and engineers around the world.
Pioneer Hi-Bred, a DuPont business, is the world's leading source of customized solutions for farmers, livestock producers and grain and oilseed processors. With headquarters in Des Moines, Iowa, Pioneer provides access to advanced plant genetics in nearly 70 countries.
(Nanowerk News) DuPont India today announced the opening of the first research facility at the DuPont Knowledge Center (DKC) in Hyderabad. The Biotech Research Center begins its operations with more than 80 scientists working on a variety of global research programs on plant and industrial biotechnology. The India center is the first integrated agriculture and industrial biotechnology research center for DuPont outside the USA. The other research facilities at the DKC will come up in phases over the next couple of months, and the complete DuPont Knowledge Center is expected to be formally inaugurated sometime before this year-end.
“The global demand for agricultural crops is very strong. We have the science to help farmers and others across the value chain meet the growing demand and this research center is going to help us do that faster,” said William Niebur, vice president, DuPont Crop Genetics Research and Development and chief scientist at DuPont subsidiary Pioneer Hi-Bred International, while announcing the opening of the center.
The Biotech Research Center at DKC will focus on bringing new crop genetics to the market faster and on application of industrial biotechnology to produce biofuels and biomaterials for global markets. Plant biotech scientists at the DKC will work on developing biotech traits and technologies that will be incorporated into multiple crops for markets the world over. The trait discovery work conducted on site will help create advanced seed products to meet the growing global demand for increased food production, improved animal feed products and expanding energy needs. Research teams will work to deliver new technologies and products for the DuPont Agriculture & Nutrition platform and the DuPont Applied BioSciences business for India and global markets. Both research teams will work together to develop products from renewable resources for food, feed, materials and energy.
Starting with more than - 80 crop genetics and industrial biotech scientists today, DuPont expects the number at the Biotech Research Center to double by year-end. An estimated total of - 600 scientists and - engineers across all disciplines will work out of DKC once it is fully functional.
“By adding biotechnology to DuPont strengths in chemistry and material science, our scientists at DKC will work to develop biocatalysts that will utilize renewable feedstocks to deliver sustainable innovations to global markets,” said John Pierce, Vice President of Technology, DuPont Applied BioSciences, on the occasion of the opening of the Biotech Center at the DKC.
Emphasizing the significance of the DuPont Knowledge Center, Balvinder Kalsi, President and CEO, DuPont India, said, “The DuPont Knowledge Center will provide substantially increased competitiveness to build the future of DuPont and contribute to DuPont India’s growth. I expect DuPont Knowledge Center to be a global Center of Excellence for DuPont. This will enable us to increase our ‘speed to market’ with products that come out of our R&D and Innovations pipeline, not only for India but also for other growth regions”.
The DKC in India is very important to the global R&D and Innovation strategy of DuPont. This center reinforces the importance of India, and the city of Hyderabad, as the emerging center of knowledge excellence, particularly in the new scientific disciplines of biotechnology, bioengineering, bioinformatics, nanotechnology and other emerging sciences. The DKC at Hyderabad will undertake basic research and product application development across all five of the business growth platforms for global and local markets, as well as offer other knowledge services to DuPont businesses.
DuPont today has major plant biotech research centers in Delaware, Iowa and California along with 90 plant genetics research centers around the globe. Globally, DuPont has more than 50 R&D facilities, 20 in the United States and 30 in 11 other nations. DuPont invests an average of $1.3 billion annually on global research and development in a diverse range of technologies for many markets including agriculture, automotive, construction, electronics, chemicals and industrial materials. Today, DuPont has more than 5,000 scientists and engineers around the world.
Pioneer Hi-Bred, a DuPont business, is the world's leading source of customized solutions for farmers, livestock producers and grain and oilseed processors. With headquarters in Des Moines, Iowa, Pioneer provides access to advanced plant genetics in nearly 70 countries.
first generic version of the international brand – Abraxane of Abraxis BioSciences, USA, with sales of approximately US$375 million
Natco Makes Nanotechnology Debut With Launch of Breast Cancer Drug Albupax
(Nanowerk News) Natco Pharma, an Indian pharmaceutical company, has launched Albupax, its first nanotechnology drug.
Albupax is the first generic version of the international brand – Abraxane of Abraxis BioSciences, USA, with sales of approximately US$375 million. Albupax has been indigenously developed by Natco in India and is the first albumin bound Paclitaxel in nanoparticle to be developed in India.
Albupax, consists of Paclitaxel in an albumin bound nanoparticle form, is used in the treatment of breast cancer. The incidence of breast cancer is on the rise in India, and currently over a lakh new patients are added every year. By 2015, the number of new cases are likely to go upto 2 lakh every year, a Natco press release stated.
Albupax replaces the conventional Paclitaxel and has the advantage of having least side effects. In the conventional Paclitaxel, the solvent polyethylated castor oil is used, which causes severe side effects such as neutropenia, hyper-sensitivity reactions and neuropathy. Albupax does not contain this solvent, and hence can be given in optimum doses for enhanced efficacy.
Each 100 mg vial of Albupax has been priced at Rs 11,500. The estimated Indian market for this product is in the region of Rs 150 crore and the company expects Albupax to garner a reasonable share of this market. This brand has the potential of becoming the single largest brand amongst its basket of oncology products. The company is also exploring the possibility of a tie-up for taking this brand to international markets.
(Nanowerk News) Natco Pharma, an Indian pharmaceutical company, has launched Albupax, its first nanotechnology drug.
Albupax is the first generic version of the international brand – Abraxane of Abraxis BioSciences, USA, with sales of approximately US$375 million. Albupax has been indigenously developed by Natco in India and is the first albumin bound Paclitaxel in nanoparticle to be developed in India.
Albupax, consists of Paclitaxel in an albumin bound nanoparticle form, is used in the treatment of breast cancer. The incidence of breast cancer is on the rise in India, and currently over a lakh new patients are added every year. By 2015, the number of new cases are likely to go upto 2 lakh every year, a Natco press release stated.
Albupax replaces the conventional Paclitaxel and has the advantage of having least side effects. In the conventional Paclitaxel, the solvent polyethylated castor oil is used, which causes severe side effects such as neutropenia, hyper-sensitivity reactions and neuropathy. Albupax does not contain this solvent, and hence can be given in optimum doses for enhanced efficacy.
Each 100 mg vial of Albupax has been priced at Rs 11,500. The estimated Indian market for this product is in the region of Rs 150 crore and the company expects Albupax to garner a reasonable share of this market. This brand has the potential of becoming the single largest brand amongst its basket of oncology products. The company is also exploring the possibility of a tie-up for taking this brand to international markets.
PR-CANADA.net
PR-CANADA.net
* Search
* Contact
* Submit your PR for free!
* Home
Home arrow Other arrow BioCurex Obtains First Patent on Therapeutic Applications for Proprietary RECAF Marker
Tuesday, 23 September 2008
Regions
Alberta
British Columbia
Manitoba
New Brunswick
Newfoundland&Labrador
Northwest Territories
Nova Scotia
Nunavut
Ontario
Prince Edward Island
Quebec
Saskatchewan
Yukon Territory
Other
Non-Canadian PRs
BioCurex Obtains First Patent on Therapeutic Applications for Proprietary RECAF Marker PDF Print E-mail
Written by marin2008
Saturday, 20 September 2008
BioCurex Inc. (OTCBB:BOCX) today announced that the Australian Patent Office has issued a notice of acceptance for a divisional application of our original patent filing.
This is the first patent awarded to BioCurex for the development of therapeutic applications of its RECAF technology. All proprietary protection had previously only covered diagnostic applications, and this approval from the Australian Patent Office is a milestone for the company in an important field of application.
The original filing contained claims related to both diagnostics and therapeutics. During the reviewing process, the mixed nature of the claims resulted in a split (technically known as a divisional application) of the claims in two separate patent files while maintaining the original date. The diagnostic patent application was granted by the Australian Patent Office before and now, the divisional containing the claims for therapeutic applications have also been approved. The process of filing a divisional is a fairly common practice. We expect similar outcomes in other territories where we have divisional pending applications.
BioCurex has proprietary technology on the uses of a molecule called RECAF that is present on the surface and inside cancer cells - though which are mostly absent from healthy cells as well as benign tumor cells. Cancer cells release some RECAF into the blood stream and this has allowed us to develop a blood test for cancer that detects approximately 90% of patients with malignancies at the standard specificity of 95% (5% false positives).
The presence of RECAF also on the surface of malignant cells allows for the specific targeting of a cancer. That is, there is no collateral damage to healthy cells known as "side effects" produced by traditional chemotherapy. Antibodies are particularly suited to target specific molecules and approximately 20 have already been approved by the FDA. Applications range from arthritis (Humira®) to cancer (Rituximab®, certain lymphomas and leukemias). Anti-cancer antibody-based therapies represent a multi-billion dollar market size.
Previous work in animals and a small number of patients have shown that malignant tumors can be imaged after injecting a radioactive tracer attached to a molecule that recognizes RECAF. Some of these results have been confirmed and published by other academic research laboratories. This suggests that cancers might be specifically irradiated after treatment with a heavily radio-labeled anti-RECAF antibody.
We have also shown at an international cancer congress that 100% of cancer cells in culture can be killed by anti-RECAF antibodies carrying killing agents, while over 80% of normal cells are unaffected. Earlier work also produced very significant results following the injection of anti-RECAF antibodies into animals with cancer.
The data are still very preliminary and therefore they require further confirmation before any firm conclusions can be drawn. However, the issuance of this first patent allowance is a significant step in moving in that direction because it facilitates approaching major pharmaceutical companies interested in licensing this type of targeted cancer therapy. BioCurex has already secured licenses for its diagnostic tests with Abbott Labs (ABT) and Inverness Medical Innovations (IMA).
Biocurex is already working on therapeutic applications, an initiative that will be largely expanded once the diagnostic applications are marketed.
About BioCurex:
BioCurex, Inc. is a biotechnology company that is developing products based on patented/proprietary technology in the areas of cancer diagnosis, imaging and therapy. The technology identifies a cancer marker known as RECAFTM, which is found on malignant cells from a variety of cancer types but is absent in most normal or benign cells.
BioCurex has signed licensing agreements for its cancer detection blood tests with Abbott Laboratories and with Inverness Medical Innovations (for further information on these agreements see: http://sec.gov/Archives/edgar/data/1092562/000100487808000117/sb2amnd4s1april08.txt).
The cancer marker RECAFTM has emerged as a potential biomarker that may be useful in the development of new cancer diagnostics tests. Preliminary studies from the investigators at BioCurex have reported a high level of clinical sensitivity and specificity for RECAF in many of the most common cancers, including prostate, breast, colorectal, lung and others.
To read more about the Company, please visit the News section in our web site (www.biocurex.com).
Note:
The Company has not authorized the release of this information in any form that contravenes the Communication Act and will not be responsible for unsolicited massive distribution of this material by e-mail or facsimile by unauthorized parties. Statements in this press release, which are not historical facts, are "forward-looking statements'' within the meaning given to that term in the Private Securities Litigation Reform Act of 1995. The Company intends that such forward-looking statements be subject to the safe harbors created thereby. Since these statements involve risks and uncertainties and are subject to change at any time, the Company's actual results could differ materially from expected results.
* Custom IDX Tools Increase Efficiency and Visibility for Broker Richard Marcus’ Integrated Website
* “S1” number plate sells for almost £400,000
* Rainbow Bingo has launched its very own Affiliate Program offering a huge 40% Rev Share to ALL new A
* Synology® Announced the Official Release of Disk Station Manager 2.0 September Firmware Upgrade
Top!
© 2008 PR-CANADA.net
Joomla! is Free Software released under the GNU/GPL License.
Top!
Interesting sites: paris hotels, press releases
* Search
* Contact
* Submit your PR for free!
* Home
Home arrow Other arrow BioCurex Obtains First Patent on Therapeutic Applications for Proprietary RECAF Marker
Tuesday, 23 September 2008
Regions
Alberta
British Columbia
Manitoba
New Brunswick
Newfoundland&Labrador
Northwest Territories
Nova Scotia
Nunavut
Ontario
Prince Edward Island
Quebec
Saskatchewan
Yukon Territory
Other
Non-Canadian PRs
BioCurex Obtains First Patent on Therapeutic Applications for Proprietary RECAF Marker PDF Print E-mail
Written by marin2008
Saturday, 20 September 2008
BioCurex Inc. (OTCBB:BOCX) today announced that the Australian Patent Office has issued a notice of acceptance for a divisional application of our original patent filing.
This is the first patent awarded to BioCurex for the development of therapeutic applications of its RECAF technology. All proprietary protection had previously only covered diagnostic applications, and this approval from the Australian Patent Office is a milestone for the company in an important field of application.
The original filing contained claims related to both diagnostics and therapeutics. During the reviewing process, the mixed nature of the claims resulted in a split (technically known as a divisional application) of the claims in two separate patent files while maintaining the original date. The diagnostic patent application was granted by the Australian Patent Office before and now, the divisional containing the claims for therapeutic applications have also been approved. The process of filing a divisional is a fairly common practice. We expect similar outcomes in other territories where we have divisional pending applications.
BioCurex has proprietary technology on the uses of a molecule called RECAF that is present on the surface and inside cancer cells - though which are mostly absent from healthy cells as well as benign tumor cells. Cancer cells release some RECAF into the blood stream and this has allowed us to develop a blood test for cancer that detects approximately 90% of patients with malignancies at the standard specificity of 95% (5% false positives).
The presence of RECAF also on the surface of malignant cells allows for the specific targeting of a cancer. That is, there is no collateral damage to healthy cells known as "side effects" produced by traditional chemotherapy. Antibodies are particularly suited to target specific molecules and approximately 20 have already been approved by the FDA. Applications range from arthritis (Humira®) to cancer (Rituximab®, certain lymphomas and leukemias). Anti-cancer antibody-based therapies represent a multi-billion dollar market size.
Previous work in animals and a small number of patients have shown that malignant tumors can be imaged after injecting a radioactive tracer attached to a molecule that recognizes RECAF. Some of these results have been confirmed and published by other academic research laboratories. This suggests that cancers might be specifically irradiated after treatment with a heavily radio-labeled anti-RECAF antibody.
We have also shown at an international cancer congress that 100% of cancer cells in culture can be killed by anti-RECAF antibodies carrying killing agents, while over 80% of normal cells are unaffected. Earlier work also produced very significant results following the injection of anti-RECAF antibodies into animals with cancer.
The data are still very preliminary and therefore they require further confirmation before any firm conclusions can be drawn. However, the issuance of this first patent allowance is a significant step in moving in that direction because it facilitates approaching major pharmaceutical companies interested in licensing this type of targeted cancer therapy. BioCurex has already secured licenses for its diagnostic tests with Abbott Labs (ABT) and Inverness Medical Innovations (IMA).
Biocurex is already working on therapeutic applications, an initiative that will be largely expanded once the diagnostic applications are marketed.
About BioCurex:
BioCurex, Inc. is a biotechnology company that is developing products based on patented/proprietary technology in the areas of cancer diagnosis, imaging and therapy. The technology identifies a cancer marker known as RECAFTM, which is found on malignant cells from a variety of cancer types but is absent in most normal or benign cells.
BioCurex has signed licensing agreements for its cancer detection blood tests with Abbott Laboratories and with Inverness Medical Innovations (for further information on these agreements see: http://sec.gov/Archives/edgar/data/1092562/000100487808000117/sb2amnd4s1april08.txt).
The cancer marker RECAFTM has emerged as a potential biomarker that may be useful in the development of new cancer diagnostics tests. Preliminary studies from the investigators at BioCurex have reported a high level of clinical sensitivity and specificity for RECAF in many of the most common cancers, including prostate, breast, colorectal, lung and others.
To read more about the Company, please visit the News section in our web site (www.biocurex.com).
Note:
The Company has not authorized the release of this information in any form that contravenes the Communication Act and will not be responsible for unsolicited massive distribution of this material by e-mail or facsimile by unauthorized parties. Statements in this press release, which are not historical facts, are "forward-looking statements'' within the meaning given to that term in the Private Securities Litigation Reform Act of 1995. The Company intends that such forward-looking statements be subject to the safe harbors created thereby. Since these statements involve risks and uncertainties and are subject to change at any time, the Company's actual results could differ materially from expected results.
* Custom IDX Tools Increase Efficiency and Visibility for Broker Richard Marcus’ Integrated Website
* “S1” number plate sells for almost £400,000
* Rainbow Bingo has launched its very own Affiliate Program offering a huge 40% Rev Share to ALL new A
* Synology® Announced the Official Release of Disk Station Manager 2.0 September Firmware Upgrade
Top!
© 2008 PR-CANADA.net
Joomla! is Free Software released under the GNU/GPL License.
Top!
Interesting sites: paris hotels, press releases
Applied Nanotech Holdings
Applied Nanotech Holdings to Showcase New Nanotechnology Products at nanoTX USA 2008 PDF Print E-mail
Written by marin2008
Saturday, 20 September 2008
Applied Nanotech Holdings, Inc. (OTCBB: APNT)announced that its subsidiary, Applied Nanotech, Inc. ("ANI"), willshowcase several new advanced nanotechnology products at nanoTX USA'08 tobe held October 2-3 in Dallas, Texas at the Hyatt Regency Convention Hotel.ANI will display two products that it now has available for sale: metallicnanoparticles including copper, silver, nickel, aluminum, zinc, iron andcobalt; and a unique heat sink material known as CarbAl™ composite.
"This availability of commercial volumes of consistent high qualitynanoparticles is the result of our metallic ink development project that weundertook with our strategic partner (see press release of October 1,2007). We are pleased to make available the results of this developmentwork and to enable greater access to the unique and beneficialcharacteristics these nanomaterials provide, which will ultimatelycontribute to the advancement of the nanotechnology industry," said TomBijou, Chairman and CEO of Applied Nanotech Holdings, Inc.
Detailed information regarding the metallic nanoparticles can be found onANI's website http://www.appliednanotech.net/ANI/nanoparticles.
Dr. Zvi Yaniv, ANI President and CEO, noted, "nanoTX USA provides anopportunity for us to present our revolutionary high thermal diffusivematerials that may provide solutions to the needs of the microelectronicindustry for low cost high quality heat sink material. This new material islighter than traditional metallic heat sinks while being three times moreeffective at diffusing heat."
The new CarbAl™ heat sink material is a nanocomposite of a carbonaceoustype of material and aluminum. The aluminum content is only 20%, while thethermal transmission of the new material is approaching 500 W/mK (forcomparison aluminum thermal conductivity is 203 and copper is 390). Atechnical summary of the CarbAl material can be found at:http://www.appliednanotech.net/TechnologyPlatforms/materials/CarbAl.asp.
In addition to these newly available products, ANI will also exhibitinnovations from its extensive patent portfolio, including inkjettableconductive copper ink, epoxy nanocomposites, sensors, CNT electron emissionbased devices such as sensors and neutron generators, etc.
See http://www.nanotx.biz for more information about the nanoTX USA'08Conference and Expo.
ABOUT APPLIED NANOTECH HOLDINGS, INC.
Applied Nanotech Holdings, Inc. is a premier research and commercializationorganization dedicated to developing applications for nanotechnology withan extremely strong position in the fields of electron emissionapplications from carbon film/nanotubes, sensors, functionalizednanomaterials, and nanoelectronics. It also possesses investments relatedto electronic digitized sign technology. ANI has over 250 patents orpatents pending. Its business model is to license its technology topartners that will manufacture and distribute products using thetechnology. ANI's website is www.appliednanotech.net.
SAFE HARBOR STATEMENT
This press release contains forward-looking statements that involve risksand uncertainties concerning our business, products, and financial results.Actual results may differ materially from the results predicted. Moreinformation about potential risk factors that could affect our business,products, and financial results are included in our annual report on Form10-K for the fiscal year ended December 31, 2007, and in reportssubsequently filed by us with the Securities and Exchange Commission("SEC"). All documents are available through the SEC's Electronic DataGathering Analysis and Retrieval System (EDGAR) at www.sec.gov or from ourwebsite listed above. We hereby disclaim any obligation to publicly updatethe information provided above, including forward-looking statements, toreflect subsequent events or circumstances.
Written by marin2008
Saturday, 20 September 2008
Applied Nanotech Holdings, Inc. (OTCBB: APNT)announced that its subsidiary, Applied Nanotech, Inc. ("ANI"), willshowcase several new advanced nanotechnology products at nanoTX USA'08 tobe held October 2-3 in Dallas, Texas at the Hyatt Regency Convention Hotel.ANI will display two products that it now has available for sale: metallicnanoparticles including copper, silver, nickel, aluminum, zinc, iron andcobalt; and a unique heat sink material known as CarbAl™ composite.
"This availability of commercial volumes of consistent high qualitynanoparticles is the result of our metallic ink development project that weundertook with our strategic partner (see press release of October 1,2007). We are pleased to make available the results of this developmentwork and to enable greater access to the unique and beneficialcharacteristics these nanomaterials provide, which will ultimatelycontribute to the advancement of the nanotechnology industry," said TomBijou, Chairman and CEO of Applied Nanotech Holdings, Inc.
Detailed information regarding the metallic nanoparticles can be found onANI's website http://www.appliednanotech.net/ANI/nanoparticles.
Dr. Zvi Yaniv, ANI President and CEO, noted, "nanoTX USA provides anopportunity for us to present our revolutionary high thermal diffusivematerials that may provide solutions to the needs of the microelectronicindustry for low cost high quality heat sink material. This new material islighter than traditional metallic heat sinks while being three times moreeffective at diffusing heat."
The new CarbAl™ heat sink material is a nanocomposite of a carbonaceoustype of material and aluminum. The aluminum content is only 20%, while thethermal transmission of the new material is approaching 500 W/mK (forcomparison aluminum thermal conductivity is 203 and copper is 390). Atechnical summary of the CarbAl material can be found at:http://www.appliednanotech.net/TechnologyPlatforms/materials/CarbAl.asp.
In addition to these newly available products, ANI will also exhibitinnovations from its extensive patent portfolio, including inkjettableconductive copper ink, epoxy nanocomposites, sensors, CNT electron emissionbased devices such as sensors and neutron generators, etc.
See http://www.nanotx.biz for more information about the nanoTX USA'08Conference and Expo.
ABOUT APPLIED NANOTECH HOLDINGS, INC.
Applied Nanotech Holdings, Inc. is a premier research and commercializationorganization dedicated to developing applications for nanotechnology withan extremely strong position in the fields of electron emissionapplications from carbon film/nanotubes, sensors, functionalizednanomaterials, and nanoelectronics. It also possesses investments relatedto electronic digitized sign technology. ANI has over 250 patents orpatents pending. Its business model is to license its technology topartners that will manufacture and distribute products using thetechnology. ANI's website is www.appliednanotech.net.
SAFE HARBOR STATEMENT
This press release contains forward-looking statements that involve risksand uncertainties concerning our business, products, and financial results.Actual results may differ materially from the results predicted. Moreinformation about potential risk factors that could affect our business,products, and financial results are included in our annual report on Form10-K for the fiscal year ended December 31, 2007, and in reportssubsequently filed by us with the Securities and Exchange Commission("SEC"). All documents are available through the SEC's Electronic DataGathering Analysis and Retrieval System (EDGAR) at www.sec.gov or from ourwebsite listed above. We hereby disclaim any obligation to publicly updatethe information provided above, including forward-looking statements, toreflect subsequent events or circumstances.
nanoTX USA 2008
Applied Nanotech Holdings to Showcase New Nanotechnology Products at nanoTX USA 2008
Last update: 9:05 a.m. EDT Sept. 17, 2008
AUSTIN, TX, Sep 17, 2008 (MARKET WIRE via COMTEX) -- Applied Nanotech Holdings, Inc. (APNT:
applied nanotech holdings in com
News, chart, profile, more
Last: 0.62-0.02-3.12%
3:37pm 09/22/2008
Delayed quote data
Add to portfolio
Analyst
Create alert
Insider
Discuss
Financials
Sponsored by:
APNT 0.62, -0.02, -3.1%) announced that its subsidiary, Applied Nanotech, Inc. ("ANI"), will showcase several new advanced nanotechnology products at nanoTX USA'08 to be held October 2-3 in Dallas, Texas at the Hyatt Regency Convention Hotel. ANI will display two products that it now has available for sale: metallic nanoparticles including copper, silver, nickel, aluminum, zinc, iron and cobalt; and a unique heat sink material known as CarbAl(TM) composite.
"This availability of commercial volumes of consistent high quality nanoparticles is the result of our metallic ink development project that we undertook with our strategic partner (see press release of October 1, 2007). We are pleased to make available the results of this development work and to enable greater access to the unique and beneficial characteristics these nanomaterials provide, which will ultimately contribute to the advancement of the nanotechnology industry," said Tom Bijou, Chairman and CEO of Applied Nanotech Holdings, Inc.
Detailed information regarding the metallic nanoparticles can be found on ANI's website http://www.appliednanotech.net/ANI/nanoparticles.
Dr. Zvi Yaniv, ANI President and CEO, noted, "nanoTX USA provides an opportunity for us to present our revolutionary high thermal diffusive materials that may provide solutions to the needs of the microelectronic industry for low cost high quality heat sink material. This new material is lighter than traditional metallic heat sinks while being three times more effective at diffusing heat."
The new CarbAl(TM) heat sink material is a nanocomposite of a carbonaceous type of material and aluminum. The aluminum content is only 20%, while the thermal transmission of the new material is approaching 500 W/mK (for comparison aluminum thermal conductivity is 203 and copper is 390). A technical summary of the CarbAl material can be found at: http://www.appliednanotech.net/TechnologyPlatforms/materials/CarbAl.asp.
In addition to these newly available products, ANI will also exhibit innovations from its extensive patent portfolio, including inkjettable conductive copper ink, epoxy nanocomposites, sensors, CNT electron emission based devices such as sensors and neutron generators, etc.
See http://www.nanotx.biz for more information about the nanoTX USA'08 Conference and Expo.
ABOUT APPLIED NANOTECH HOLDINGS, INC.
Applied Nanotech Holdings, Inc. is a premier research and commercialization organization dedicated to developing applications for nanotechnology with an extremely strong position in the fields of electron emission applications from carbon film/nanotubes, sensors, functionalized nanomaterials, and nanoelectronics. It also possesses investments related to electronic digitized sign technology. ANI has over 250 patents or patents pending. Its business model is to license its technology to partners that will manufacture and distribute products using the technology. ANI's website is www.appliednanotech.net.
SAFE HARBOR STATEMENT
This press release contains forward-looking statements that involve risks and uncertainties concerning our business, products, and financial results. Actual results may differ materially from the results predicted. More information about potential risk factors that could affect our business, products, and financial results are included in our annual report on Form 10-K for the fiscal year ended December 31, 2007, and in reports subsequently filed by us with the Securities and Exchange Commission ("SEC"). All documents are available through the SEC's Electronic Data Gathering Analysis and Retrieval System (EDGAR) at www.sec.gov or from our website listed above. We hereby disclaim any obligation to publicly update the information provided above, including forward-looking statements, to reflect subsequent events or circumstances.
COMPANY CONTACT
Doug Baker
Applied Nanotech Holdings, Inc.
248.391.0612
Email Contact
MEDIA CONTACT
William J. Spina
781.378.2000
Email Contact
Last update: 9:05 a.m. EDT Sept. 17, 2008
AUSTIN, TX, Sep 17, 2008 (MARKET WIRE via COMTEX) -- Applied Nanotech Holdings, Inc. (APNT:
applied nanotech holdings in com
News, chart, profile, more
Last: 0.62-0.02-3.12%
3:37pm 09/22/2008
Delayed quote data
Add to portfolio
Analyst
Create alert
Insider
Discuss
Financials
Sponsored by:
APNT 0.62, -0.02, -3.1%) announced that its subsidiary, Applied Nanotech, Inc. ("ANI"), will showcase several new advanced nanotechnology products at nanoTX USA'08 to be held October 2-3 in Dallas, Texas at the Hyatt Regency Convention Hotel. ANI will display two products that it now has available for sale: metallic nanoparticles including copper, silver, nickel, aluminum, zinc, iron and cobalt; and a unique heat sink material known as CarbAl(TM) composite.
"This availability of commercial volumes of consistent high quality nanoparticles is the result of our metallic ink development project that we undertook with our strategic partner (see press release of October 1, 2007). We are pleased to make available the results of this development work and to enable greater access to the unique and beneficial characteristics these nanomaterials provide, which will ultimately contribute to the advancement of the nanotechnology industry," said Tom Bijou, Chairman and CEO of Applied Nanotech Holdings, Inc.
Detailed information regarding the metallic nanoparticles can be found on ANI's website http://www.appliednanotech.net/ANI/nanoparticles.
Dr. Zvi Yaniv, ANI President and CEO, noted, "nanoTX USA provides an opportunity for us to present our revolutionary high thermal diffusive materials that may provide solutions to the needs of the microelectronic industry for low cost high quality heat sink material. This new material is lighter than traditional metallic heat sinks while being three times more effective at diffusing heat."
The new CarbAl(TM) heat sink material is a nanocomposite of a carbonaceous type of material and aluminum. The aluminum content is only 20%, while the thermal transmission of the new material is approaching 500 W/mK (for comparison aluminum thermal conductivity is 203 and copper is 390). A technical summary of the CarbAl material can be found at: http://www.appliednanotech.net/TechnologyPlatforms/materials/CarbAl.asp.
In addition to these newly available products, ANI will also exhibit innovations from its extensive patent portfolio, including inkjettable conductive copper ink, epoxy nanocomposites, sensors, CNT electron emission based devices such as sensors and neutron generators, etc.
See http://www.nanotx.biz for more information about the nanoTX USA'08 Conference and Expo.
ABOUT APPLIED NANOTECH HOLDINGS, INC.
Applied Nanotech Holdings, Inc. is a premier research and commercialization organization dedicated to developing applications for nanotechnology with an extremely strong position in the fields of electron emission applications from carbon film/nanotubes, sensors, functionalized nanomaterials, and nanoelectronics. It also possesses investments related to electronic digitized sign technology. ANI has over 250 patents or patents pending. Its business model is to license its technology to partners that will manufacture and distribute products using the technology. ANI's website is www.appliednanotech.net.
SAFE HARBOR STATEMENT
This press release contains forward-looking statements that involve risks and uncertainties concerning our business, products, and financial results. Actual results may differ materially from the results predicted. More information about potential risk factors that could affect our business, products, and financial results are included in our annual report on Form 10-K for the fiscal year ended December 31, 2007, and in reports subsequently filed by us with the Securities and Exchange Commission ("SEC"). All documents are available through the SEC's Electronic Data Gathering Analysis and Retrieval System (EDGAR) at www.sec.gov or from our website listed above. We hereby disclaim any obligation to publicly update the information provided above, including forward-looking statements, to reflect subsequent events or circumstances.
COMPANY CONTACT
Doug Baker
Applied Nanotech Holdings, Inc.
248.391.0612
Email Contact
MEDIA CONTACT
William J. Spina
781.378.2000
Email Contact
Virtual Stock Exchange
*
*
*
*
* More
o BigCharts
o Virtual Stock Exchange
o FiLife.com
o WSJ Asia
o WSJ Europe
o WSJ Portuguese
o WSJ Spanish
o WSJ Chinese
o Financial News Online
SEARCH
Choose a quote match or "go" to get quote
*
*
*
*
*
*
*
*
*
*
Choose a topic to search news:
*
*
*
*
*
*
*
*
*
*
Stock Market Quote - Business News - Financial News
close
Welcome, please sign in.
My Portfolio • Community • VSE • Alerts
* Front Page
o News & Commentary
o Markets
o Mutual Funds & ETFs
o Personal Finance
o Technology
o Tools & Research
o My MarketWatch
o Community
o Video
*
* News & Commentary
*
* Columnists
*
* First Take
*
* Special Reports
o How to Buy
o Trading Strategies
o The Heat is On
o Power Crisis
o Digital Home
o Dubai
*
* Blogs
*
* Podcasts
*
* Industry News
o Technology
o Health Care
o Retail
o Automobiles
*
* Economy & Politics
o Fed
o The Election
*
* Newsletters
o Guru's Corner
o Directory
o Hulbert Financial Digest
*
* Election 2008
latest news
[APD] Air Products sees Q4 cont. ops of $1.24 to $1.26 a share
Key Challenges and Issues facing the World Carbon Nanotubes Market
Last update: 5:15 a.m. EDT Sept. 18, 2008
LONDON, UNITED KINGDOM, Sep 18, 2008 (MARKET WIRE via COMTEX) -- Reportlinker.com announces that a new market research report related to the Chemicals industry industry is available in its catalogue.
World Carbon Nanotubes Market
http://www.reportlinker.com/p092431/World-Carbon-Nanotubes-Market.html
This report analyzes the worldwide markets for Carbon Nanotubes in US$ Million. The major product segments analyzed are Single Walled Carbon Nanotubes, and Multi Walled Carbon Nanotubes.The major end use segments discussed are R&D Institutes/Laboratories, Electronics, Field Emission Devices, Composites, and Others (Predominantly Fuel Cells & Batteries). The report provides separate comprehensive analytics for the US, Europe, Asia-Pacific, and Rest of World. Annual forecasts are provided for each region for the period of 2001 through 2015. The report profiles 94 companies including many key and niche players worldwide such as Catalyx Nanotech Inc., Hyperion Catalysis International, Inc., ILJIN Nanotech Co., Ltd., Nanocyl S.A., Nanoledge, Raymor Industries, Inc., Rosseter Holdings Ltd., Shenzhen Nanotech Port Co., Ltd., SouthWest NanoTechnologies, Inc., Sun Nanotech Co., Ltd., and Unidym Inc. Market data and analytics are derived from primary and secondary research. Company profiles are mostly extracted from URL research and reported select online sources.
CARBON NANOTUBES MCP-1507
A GLOBAL STRATEGIC BUSINESS REPORT
CONTENTS
I. INTRODUCTION, METHODOLOGY & PRODUCT DEFINITIONS
Study Reliability and Reporting Limitations I-1
Disclaimers I-2
Data Interpretation & Reporting Level I-2
Quantitative Techniques & Analytics I-2
Product Definitions and Scope of Study I-3
Product Segments I-3
Single Walled Carbon Nanotubes I-3
Multi Walled Carbon Nanotubes I-4
End-Use Sectors I-4
R&D Institutes/Laboratories I-4
Electronics I-4
Field Emission Devices I-4
Composites I-4
Others End-Use Applications I-5
II. EXECUTIVE SUMMARY
1. Introduction to Nanotechnology II-1
Nanotechnology - An Overview II-1
Introduction II-1
The Coming of Nano-Age II-1
Expect the Unexpected II-1
A Conceptual Definition II-1
Commercial Applications of Nanotechnology II-2
Regional Analysis by Companies II-3
Table 1: Worldwide Nanotechnology Market (2004):
Distribution of Nanotechnology Based Establishments (Large
Companies, Subsidiaries/Joint Ventures, Small
Companies/Start Ups and Universities/Research Institutes) in
North America, Europe, and Asia (includes corresponding
Graph/Chart) II-3
Future Prospects II-3
2. Carbon Nanotubes - An Overview II-5
Carbon Nanotubes - A Huge Potential Market II-5
Escalating Demand II-5
Revenues On the Rise II-5
Cost Constraints to be Resolved II-5
Multi Walled Carbon Nanotubes Drive the Market II-6
Low Price - An Advantage II-6
Applications II-6
Single Walled Carbon Nanotubes - A Burgeoning Market II-6
Current and Future Applications II-6
Research Institutions - Exploiting New Applications and
Techniques II-7
Creation of Research Centers II-7
Key Research Centers II-7
Commercialization - Future Prospects for Carbon Nanotubes II-8
Reasons For Delay II-8
Future Scenario II-8
Emerging as Key Product in Various Applications II-8
Future Applications II-8
Partnership Agreements Spur the Market II-9
3. Market Trends and Issues II-10
Production Costs Surpass Potential Benefits II-10
Different Means to Surmount Low Production II-10
Innovation and Quality Drive Growth II-10
End-Users - Demand Variety Products II-10
Improved Production Methods II-10
Development of New Technologies II-11
Enhanced Production Techniques Offer Various Advantages II-11
Partnership Agreements Develop New Techniques and Products II-11
Exploitation of Resources II-11
Increase in Research & Development Activities II-12
Evolution of R&D Centers II-12
Private Startups and Research Institutions II-12
Single Walled Carbon Nanotubes - A Boon to the Market II-12
Reasons for Low Production II-13
Single Walled Carbon Nanotubes Perspective II-13
Multi Walled Carbon Nanotubes Play a Major Role II-13
End-Use Perspective II-13
Non-Volatile Memories II-13
Field Emission Devices II-14
Composites II-14
Batteries and Fuel Cell Applications II-14
Sensors II-14
Other Applications II-14
Investment Issues and High Costs Setback Rapid Commercialization II-15
Acquisition of Intellectual Property Rights II-15
Patents Offer Multiple Advantages II-15
Companies and Research Institutions Holding Patents II-15
Patents - Analysis by End-Use Sector II-16
Challenging Issues II-16
4. Global Market Analysis II-17
Analysis by Geographic Region II-17
Analysis by Product Segment II-17
Analysis by End-Use Sector II-17
Carbon Nanotubes II-17
Single Walled Carbon Nanotubes II-17
Multi Walled Carbon Nanotubes II-18
5. Product Overview & Processing Techniques II-19
Overview & Definition II-19
History II-19
Introduction II-19
Properties II-20
Uses II-20
Product Categories II-20
Single Walled Carbon Nanotube II-20
Overview II-20
Properties II-20
Production Processes II-21
Multi Walled Carbon Nanotubes II-21
Overview II-21
Performs Various Functions II-21
Single Walled Carbon Nanotubes Vs Multi Walled Carbon Nanotubes II-21
Processing Techniques II-22
Laser Ablation II-22
Arc Discharge or Pulsed laser Vaporization II-22
Chemical Vapor Deposition II-22
Disadvantage II-22
Gas-Phase Processing II-22
6. End-Use Sectors - An Overview II-23
Applications II-23
Budding Markets II-23
End-Use Sectors II-23
R&D Institutes/Laboratories - Everlasting End-User II-23
Field Emission Devices - Emerging Potential Market II-24
Field Emission Cathode II-24
X-ray II-24
Field Emission Display II-24
Electronics II-25
Applications II-25
Carbon Nanotubes Expected to Replace Existing Transistors II-25
Composites II-25
Applications II-25
Plastics II-26
Health and Life Sciences II-26
Others II-26
Nonvolatile Memory Devices II-27
Fuel Cells II-27
Batteries II-27
Sensors II-27
Super Capacitors II-28
Television II-28
Biomechanical Applications II-28
Nanowires II-28
End-Use Applications - Commercialization Time Grid II-28
7. Research and Development II-29
Carbon Nanotubes to Assist Cancer Treatment II-29
Carbon Nanotubes' Study at Notre Dame University II-29
NanoSensors Tests Carbon Nanotubes Devices II-29
Encapsulation and Stabilization of Beta-Carotene in Carbon
Nanotubes II-29
Reverse Engineering of Carbon Nanotubes II-30
Researchers Produce Vertical Single and Double Walled Carbon
Nanotubes II-30
NanoHand Project for Automated Handling of Carbon Nanotubes II-30
8. Technological Developments II-32
IBM Develops an Evaluation Technique for Carbon Nanotubes II-32
Novel Method for Identical Single Wall Carbon Nanotubes II-32
Caltech Researchers Discover New Property of Carbon Nanotubes II-32
Nantero Develop Method to Use Carbon Nanotubes in Wafer
Fabrication Facilities II-32
Samsung to Utilize Carbon Nanotubes in LCD TVs II-33
Innovative Techniques to Employ Carbon Nanotubes in Electronic
Devices II-33
Bayer MaterialScience Introduces Baytubes II-33
Innovative Carbon Nanotubes Devices to Detect Gene Mutations II-33
MIT Researchers Manipulate Carbon Nanotubes II-34
Motorola Builds Sensors Based on Carbon Nanotubes II-34
Double-Walled Carbon Nanotubes for Power-Saving Display Panels II-34
MIT Researchers Develop Carbon Nanotube Ultracapacitors II-34
Efficient Manufacturing Process for Carbon Nanotubes II-35
Nanocyl Introduces Innovative Industrial Reactor to Produce
Carbon Nanotubes II-35
University of Texas Launches a New Method to Manufacture
Nanotube Sheets II-35
University of California Designs Innovative Process to
Manufacture Supercapacitors II-35
Johnson Space Center Develops New Method to Align and Assemble
Single-Wall Carbon Nanotubes II-35
Seoul University and Sungkyunkwan University Introduces a New
Separation Process II-36
Ames Research Center Rolls Out New Process for Manufacturing
Carbon Nanotubes II-36
Nanoledge Launched New Technique for Developing Fibers using
Carbon Nanotubes II-36
California Institute of Technology Rolls Out New Technique II-36
IBM Pioneers New Method to Increase Efficiency of Light Using
Carbon Nanotubes II-36
9. Product Innovations/Introductions II-37
Nanocyl Displays Extensive Products II-37
Ahwahnee Technology Debuts Carbon Nanotubes Innovation Kit(tm) II-37
Nanomix Rolls Out Universal Detection Platform Based on
Sensation(tm) Nanotubes II-37
Superconductivity Technology Center Develops Single Walled
Carbon Nanotubes II-37
Johnson Space Center Uses Diamond Coated Carbon Nanotubes to
Develop Field Emission Cathodes II-38
Pacific Fuel Cell Purchases Chemical Vapor Deposition System
to Manufacture Carbon Nanotubes II-38
Ames Research Center Engineers Carbon Nanotube Based Gears II-38
University of Illinois Introduces Glucose Sensor Using Carbon
Nanotubes II-38
Rensselaer Polytechnic Institute Develops Carbon Nanotube Brushes II-38
Zyvex Unveils New Product Family II-39
Researchers at University of North Carolina Uses Carbon
Nanotubes in Designing X-Ray II-39
NASA's Johnson Space Center to Develop Electrodes from Carbon
Nanotubes II-39
Ames Research Center Introduces a Range of Multi Walled Carbon
Nanotubes II-39
University of Texas Uses Carbon Nanotubes Develop Transparent
Ribbons II-39
Nanocyl Introduces New Product to its Carbon Nanotubes Product
Line II-39
Tailored Materials Debuts New NanoCarbonMats II-40
Researchers at University of California and University of
Clemson (S.C.) Identifies Y-Shaped Nanotubes for Transistors II-40
10. Recent Industry Activity II-41
Bayer Material Science AG Signs an Agreement with Brenntag
Schweizerhall AG II-41
AIXTRON Takes Over Nano Instruments II-41
Zeox Acquires Stake in Nano Clays II-41Catalytic Materials Forms Joint Venture with Catalyx Inc II-41
Arrowhead Research Acquires Carbon Nanotechnologies II-41
Brenntag Collaborates with Buehler II-42
SouthWest NanoTechnologies to Build a New Plant II-42
Bayer Material Science to Establish Second Production Line II-42
Unidym Enters into a Strategic Alliance II-42
Raymor Industries Expands Presence in Asia II-42
Raymor to Provide Single-Walled Carbon Nanotubes II-43
Mitsui and Rice Collaborate with Team of Scientists II-43
GSI Creos to Develop Carbon Nanotubes II-43
Los Alamos Forms Joint Venture with CNT Technologies II-43
Nanocyl Joins Forces with Vantage Resin Systems II-43
Raymor Starts C-SWNT Production Using New Technique II-44
Keithley's Model 4200 Meets New IEEE 1650TM-2005 Standard II-44
NanoPolaris Changes Name to Unidym II-44
NanoPolaris Acquires Unidym II-44
CNT Technologies Selects CVD Equipment II-44
Bayer MaterialScience and Bayer Technology Services Collaborate II-44
Arkema Expands Capacity II-45
Nano-Proprietary Inks Pact to Form Venture with Da Ling II-45
Shimane Masuda Electronics and Nano-Proprietary Enters into
Agreement II-45
Raymor Nanotech Initiates Carbon Nanotube Plant II-45
Nantero Collaborates with ON Semiconductor II-45
SouthWest NanoTechnologies Acquires License from NEC II-45
NanoDynamics Receives Patent on Solid Oxide Fuel Cell Structures II-45
CSIRO Collaborates With University of Texas Dallas II-46
AP&C Bags EADS Order for Single Walled Carbon Nanotubes II-46
Tailored Materials Establishes New Manufacturing Facility II-46
INSEQ Inks Agreement with Cheap Tubes II-46
Pacific Fuel Cell Obtains Rights to Carbon Nanotube Membrane
Electrode Assembly II-47
Raymor Industries Teams Up with Institute National de la
Recherche Scientifique II-47
NanoDynamics Signs Agreement with Nanocyl II-47
Carbon Nanotechnologies Expands Pilot Plant Facility II-47
ObjectSoft Signs Agreement with RES II-47
Carbon Nanotechnologies Merges with C Sixty II-47
Los Alamos National Laboratory Inks Agreement with Carbon
Designs II-47
Nantero and Brewer Science Sign Agreement II-48
Carbon Nanotechnologies Acquires 30 Patents II-48
11. Focus on Select Global Players II-49
Catalyx Nanotech Inc. (USA) II-49
Hyperion Catalysis International, Inc. (USA) II-49
ILJIN Nanotech Co., Ltd. (South Korea) II-49
Nanocyl S.A. (Belgium) II-49
Nanoledge (France) II-50
Raymor Industries, Inc. (Canada) II-51
Rosseter Holdings Ltd. (Cyprus) II-51
Shenzhen Nanotech Port Co., Ltd. (China) II-51
SouthWest NanoTechnologies, Inc. (USA) II-52
Sun Nanotech Co., Ltd. (China) II-52
Unidym Inc. (USA) II-52
12. Focus on Select R&D Institutes/Laboratories II-53
Ames Research Center (USA) II-53
California Institute of Technology (USA) II-53
GE Global Research (USA) II-53
IBM Research (USA) II-54
Johnson Space Center (USA) II-54
Motorola Labs (USA) II-54
Philips Research (The Netherlands) II-55
Samsung Advanced Institute of Technology (South Korea) II-55
University of California (USA) II-55
University of Texas (USA) II-56
13. Global Market Perspective II-57
Table 2: World Recent Past, Current & Future Analysis for
Carbon Nanotubes by Geographic Region - US, Europe,
Asia-Pacific (including Japan), and Rest of World Markets
Independently Analyzed with Annual Sales Figures in US$
Million for Years 2001 through 2010 (includes corresponding
Graph/Chart) II-57
Table 3: World Long-term Projections for Carbon Nanotubes by
Geographic Region - US, Europe, Asia-Pacific (including
Japan), and Rest of World Markets Independently Analyzed with
Annual Sales Figures in US$ Million for Years 2011 through
2015 (includes corresponding Graph/Chart) II-58
Table 4: World 10-Year Perspective for Carbon Nanotubes by
Geographic Region - Percentage Breakdown of Dollar Sales for
US, Europe, Asia-Pacific (including Japan), and Rest of World
Markets for Years 2003, 2008 & 2012 (includes corresponding
Graph/Chart) II-59
Table 5: World Recent Past, Current & Future Analysis for
Single Walled Carbon Nanotubes by Geographic Region - US,
Europe, Asia-Pacific (including Japan), and Rest of World
Markets Independently Analyzed with Annual Sales Figures in
US$ Million for Years 2001 through 2010 (includes
corresponding Graph/Chart) II-60
Table 6: World Long-term Projections for Single Walled Carbon
Nanotubes by Geographic Region - US, Europe, Asia-Pacific
(including Japan), and Rest of World Markets Independently
Analyzed with Annual Sales Figures in US$ Million for Years
2011 through 2015 (includes corresponding Graph/Chart) II-61
Table 7: World 10-Year Perspective for Single Walled Carbon
Nanotubes by Geographic Region - Percentage Breakdown of
Dollar Sales for US, Europe, Asia-Pacific (including Japan),
and Rest of World Markets for Years 2003, 2008 & 2012
(includes corresponding Graph/Chart) II-62
Table 8: World Recent Past, Current & Future Analysis for
Multi Walled Carbon Nanotubes by Geographic Region - US,
Europe, Asia-Pacific (including Japan), and Rest of World
Markets Independently Analyzed with Annual Sales Figures in
US$ Million for Years 2001 through 2010 (includes
corresponding Graph/Chart) II-63
Table 9: World Long-term Projections for Multi Walled Carbon
Nanotubes by Geographic Region - US, Europe, Asia-Pacific
(including Japan), and Rest of World Markets Independently
Analyzed with Annual Sales Figures in US$ Million for Years
2011 through 2015 (includes corresponding Graph/Chart) II-64
Table 10: World 10-Year Perspective for Multi Walled Carbon
Nanotubes by Geographic Region - Percentage Breakdown of
Dollar Sales for US, Europe, Asia-Pacific (including Japan),
and Rest of World Markets for Years 2003, 2008 & 2012
(includes corresponding Graph/Chart) II-65
Table 11: World Recent Past, Current & Future Analysis for
Carbon Nanotubes by End-Use Sector - R&D Institutes/
Laboratories, Electronics, Field Emission Devices, Composites,
and Other End-Use Sector (inclusive of Fuel Cells & Batteries)
Markets Independently Analyzed with Annual Sales Figures in
US$ Million for Years 2001 through 2010 (includes
corresponding Graph/Chart) II-66
Table 12: World Long-term Projections for Carbon Nanotubes by
End-Use Sector - R&D Institutes/Laboratories, Electronics,
Field Emission Devices, Composites, and Other End-Use Sector
(inclusive of Fuel Cells & Batteries) Markets Independently
Analyzed with Annual Sales Figures in US$ Million for Years
2011 through 2015(includes corresponding Graph/Chart) II-67
Table 13: World 10-Year Perspective for Carbon Nanotubes by
End-Use Sector - Percentage Breakdown of Dollar Sales for R&D
Institutes/Laboratories, Electronics, Field Emission Devices,
Composites, and Other End-Use Sector (inclusive of Fuel Cells
& Batteries) Markets for Years 2003, 2008 & 2012 (includes
corresponding Graph/Chart) II-68
Table 14: World Recent Past, Current & Future Analysis for
Single Walled Carbon Nanotubes by End-Use Sector - R&D
Institutes/Laboratories, Electronics, Field Emission Devices,
Composites, and Other End-Use Sector (inclusive of Fuel Cells
& Batteries) Markets Independently Analyzed with Annual Sales
Figures in US$ Million for Years 2001 through 2010 (includes
corresponding Graph/Chart) II-69
Table 15: World Long-term Projections for Single Walled Carbon
Nanotubes by End-Use Sector - R&D Institutes/ Laboratories,
Electronics, Field Emission Devices, Composites, and Other
End-Use Sector (inclusive of Fuel Cells & Batteries) Markets
Independently Analyzed with Annual Sales Figures in US$
Million for Years 2011 through 2015 (includes corresponding
Graph/Chart) II-70
Table 16: World 10-Year Perspective for Single Walled Carbon
Nanotubes by End-Use Sector - Percentage Breakdown of Dollar
Sales for R&D Institutes/Laboratories, Electronics, Field
Emission Devices, Composites, and Other End-Use Sector
(inclusive of Fuel Cells & Batteries) Markets for Years 2003,
2008 & 2012 (includes corresponding Graph/Chart) II-71
Table 17: World Recent Past, Current & Future Analysis for
Multi Walled Carbon Nanotubes by End-Use Sector - R&D
Institutes/Laboratories, Electronics, Field Emission Devices,
Composites, and Other End-Use Sector (inclusive of Fuel Cells
& Batteries) Markets Independently Analyzed with Annual Sales
Figures in US$ Million for Years 2001 through 2010 (includes
corresponding Graph/Chart) II-72
Table 18: World Long-term Projections for Multi Walled Carbon
Nanotubes by End-Use Sector - R&D Institutes/ Laboratories,
Electronics, Field Emission Devices, Composites, and Other
End-Use Sector (inclusive of Fuel Cells & Batteries) Markets
Independently Analyzed with Annual Sales Figures in US$
Million for Years 2011 through 2015(includes corresponding
Graph/Chart) II-73
Table 19: World 10-Year Perspective for Multi Walled Carbon
Nanotubes by End-Use Sector - Percentage Breakdown of Dollar
Sales for R&D Institutes/Laboratories, Electronics, Field
Emission Devices, Composites, and Other End-Use Sector
(inclusive of Fuel Cells & Batteries) Markets for Years 2003,
2008 & 2012 (includes corresponding Graph/Chart) II-74
III. MARKET
1. The United States III-1
A.Market Analysis III-1
Current and Future Analysis III-1
Nanotechnology - An Overview III-1
Table 20: Nanotechnology Market in the US (2004):
Percentage Breakdown Depicting Distribution of
Nanotechnology Based Companies by State - California,
Massachusetts, New York, Texas, Pennsylvania, Illinois,
Ohio, New Jersey, Colorado, New Mexico, Florida, Michigan,
Arizona, Minnesota, North Carolina, Washington, Maryland,
Nevada, Tennessee, Wisconsin,Connecticut, Virginia, and
Other States (includes corresponding Graph/Chart) III-2
Carbon Nanotubes Market III-3
Issues and Trends III-3
Research Institutes and their Involvement in DevelopingCarbon Nanotubes III-3
Technological Developments III-4
Product Launches/Developments III-6
Strategic Corporate Developments III-9
Select Players III-12
Catalyx Nanotech Inc. III-12
Hyperion Catalysis International, Inc. III-13
SouthWest NanoTechnologies, Inc. III-13
Unidym Inc. III-13
Research Institutions III-14
Ames Research Center III-14
California Institute of Technology III-14
GE Global Research III-14
IBM Research III-15
Johnson Space Center III-15
Motorola Labs III-16
University of California III-16
University of Texas III-17
B.Market Analytics III-17
Table 21: US Recent Past, Current & Future Analysis for
Carbon Nanotubes by Product Segment - Single walled Carbon
Nanotube and Multi walled Carbon Nanotube Markets
Independently Analyzed with Annual Sales Figures in US$
Million for Years 2001 through 2010 (includes corresponding
Graph/Chart) III-17
Table 22: US Long-term Projections for Carbon Nanotubes by
Product Segment - Single walled Carbon Nanotube and Multi
walled Carbon Nanotube Markets Independently Analyzed with
Annual Sales Figures in US$ Million for Years 2011 through
2015 (includes corresponding Graph/Chart) III-18
Table 23: US 10-Year Perspective for Carbon Nanotubes by
Product Segment - Percentage Breakdown of Dollar Sales for
Single walled Carbon Nanotubes and Multi walled Carbon
Nanotube Markets for Years 2003, 2008 & 2012 III-18
2. Europe III-19
A.Market Analysis III-19
Current and Future Analysis III-19
Nanotechnology - An Overview III-19
Carbon Nanotubes Market III-19
Focus on Select Market III-20
The United Kingdom III-20
Key Academic Institutes in Nano Research III-20
Technological Developments III-20
Product Launches/Developments III-21
Strategic Corporate Developments III-21
Select Players / R&D Institutions III-22
Nanocyl S.A. (Belgium) III-22
Nanoledge (France) III-23
Rosseter Holdings Ltd. (Cyprus) III-23
Philips Research (The Netherlands) III-24
B.Market Analytics III-25
Table 24: European Recent Past, Current & Future Analysis
for Carbon Nanotubes by Product Segment - Single walled
Carbon Nanotubes and Multi walled Carbon Nanotubes Markets
Independently Analyzed with Annual Sales Figures in US$
Million for Years 2001 through 2010 (includes corresponding
Graph/Chart) III-25
Table 25: European Long-term Projections for Carbon
Nanotubes by Product Segment - Single walled Carbon Nanotube
and Multi walled Carbon Nanotube Markets Independently
Analyzed with Annual Sales Figures in US$ Million for Years
2011 through 2015 (includes corresponding Graph/Chart) III-26
Table 26: European 10-Year Perspective for Carbon Nanotubes
by Product Segment - Percentage Breakdown of Dollar Sales
for Single walled Carbon Nanotubes and Multi walled Carbon
Nanotube Markets for Years 2003, 2008 & 2012 III-26
3. Asia-Pacific III-27
A.Market Analysis III-27
Current and Future Analysis III-27
Nanotechnolgy - An Overview III-27
Carbon Nanotubes III-27
Overview III-27
Focus on Select Markets III-28
Australia - Part of a Tiny Revolution III-28
Nanotechnology - An Overview III-28
Challenges for Nanotechnology Development in Australia III-28
Carbon Nanotubes Market III-28
Future Applications III-29
China III-29
Nanotechnology - An Overview III-29
Government Takes the R&D Initiative III-29
Chinese Agencies Involved in Nanotech III-30
Nation's First Nanometer Technology Industrial Base Set
up in Tianjin III-30
Carbon Nanotubes Market III-30
India III-30
Japan III-31
Nanotechnology - An Overview III-31
Carbon Nanotubes Market III-31
Nanotechnology Consortium - An Interface for Technology
Transfer III-32
Future Applications III-32
South Korea III-33
Nanotechnology - An Overview III-33
Ministry of Science & Technology Takes Initiative for
Nanotech Funding III-33
Nanotech R&D Efforts III-33
Carbon Nanotubes Market III-33
Technological Development III-33
Strategic Corporate Developments III-33
Select Players / R&D Institutions III-35
ILJIN Nanotech Co., Ltd. (South Korea) III-35
Shenzhen Nanotech Port Co., Ltd. (China) III-35
Sun Nanotech Co., Ltd. (China) III-35
Samsung Advanced Institute of Technology (South Korea) III-36
B.Market Analytics III-36
Table 27: Asia-Pacific (including Japan) Recent Past,
Current & Future Analysis for Carbon Nanotubes by Product
Segment - Single walled Carbon Nanotubes and Multi walled
Carbon Nanotubes Markets Independently Analyzed with Annual
Sales Figures in US$ Million for Years 2001 through 2010
(includes corresponding Graph/Chart) III-36
Table 28: Asia-Pacific (including Japan) Long-term
Projections for Carbon Nanotubes by Product Segment - Single
walled Carbon Nanotube and Multi walled Carbon Nanotube
Markets Independently Analyzed with Annual Sales Figures in
US$ Million for Years 2011 through 2015 (includes
corresponding Graph/Chart) III-37
Table 29: Asia-Pacific (including Japan) 10-Year Perspective
for Carbon Nanotubes by Product Segment - Percentage
Breakdown of Dollar Sales for Single walled Carbon
Nanotubes and Multi walled Carbon Nanotube Markets for
Years 2003, 2008 & 2012 III-37
4. Rest of World III-38
A.Market Analysis III-38
Current and Future Analysis III-38
Focus on Select Markets III-38
Canada III-38
Universities and Government Agencies Involved in Carbon
Nanotubes Research III-38
Israel III-38
Carbon Nanotubes Market III-39
Strategic Corporate Developments III-39
Raymor Industries, Inc. - A Major Canadian Player III-40
B.Market Analytics III-41
Table 30: Rest of World Recent Past, Current & Future
Analysis for Carbon Nanotubes by Product Segment - Single
walled Carbon Nanotubes and Multi walled Carbon Nanotubes
Markets Independently Analyzed with Annual Sales Figures in
US$ Million for Years 2001 through 2010 (includes
corresponding Graph/Chart) III-41
Table 31: Rest of World Long-term Projections for Carbon
Nanotubes by Product Segment - Single walled Carbon Nanotube
and Multi walled Carbon Nanotube Markets Independently
Analyzed with Annual Sales Figures in US$ Million for Years
2011 through 2015(includes corresponding Graph/Chart) III-42
Table 32: Rest of World 10-Year Perspective for Carbon
Nanotubes by Product Segment - Percentage Breakdown of
Dollar Sales for Single walled Carbon Nanotube and Multi
walled Carbon Nanotube Markets for Years 2003, 2008 & 2012 III-42
IV. COMPETITIVE LANDSCAPE
To order this report:
World Carbon Nanotubes Market
http://www.reportlinker.com/p092431/World-Carbon-Nanotubes-Market.html
More market research reports here!
Contacts:
Reportlinker.com
Nicolas
US: (805) 652-2626 or Int: +1-805-652-2626
Email: nbo@reportlinker.com
SOURCE: Reportlinker.com
mailto:nbo@reportlinker.com
Copyright 2008 Market Wire, All rights reserved. End of Story
Top stories
5:11 AM today U.S. futures in tight range before Bernanke, Paulson
57 minutes ago Fed relaxes restrictions on banking investments
5:18 AM today Bristol-Myers lifts bid for ImClone, plans proxy fight for board
After the Bell E-newsletter
Receive a daily email with closing levels of the major indexes and important closing market news and commentary.
loading
Sign up
Privacy policy
Most Popular
READ
E-MAILED
EDITOR'S PICK
* Echoes of Iraq in Bush's handling of mortgage 'surge'
* Markets' problems haven't deterred corporate insiders
* Greed goes underground on Wall Street
* The end of Wall Street may mean less profit for Goldman, Morgan
* Hong Kong, Shanghai stocks retreat after 2-day rally
* Oil's $16 gain makes history, but its true test is yet to come
* U.S. futures in tight range before Bernanke, Paulson
* Embittered by bailout? Try Zen Millionaire's 12-step meditation
* Regulator may press WaMu to sell to consortium: report
* Airlines, retailers, banks decline in downbeat London
* Echoes of Iraq in Bush's handling of mortgage 'surge'
* Embittered by bailout? Try Zen Millionaire's 12-step meditation
* The end of Wall Street may mean less profit for Goldman, Morgan
* Pandora radio fights unjust royalty hikes
* Taro Aso selected as Japan's next prime minister
* Markets' problems haven't deterred corporate insiders
* 'Vulture' investors come home to roost in a troubled market
* Greed goes underground on Wall Street
* Brave new world for financial markets
* Tax Brackets and Tables for 2008
* U.S. futures in tight range before Bernanke, Paulson
* Fed relaxes restrictions on banking investments
* Bristol-Myers lifts bid for ImClone, plans proxy fight for board
* Echoes of Iraq in Bush's handling of mortgage 'surge'
* Oil's $16 gain makes history, but its true test is yet to come
Get the Latest MarketWatch News >>
PARTNER CENTER
Making friends on our stories?
Add them as a friend so you can keep in touch
and see what they are up to. Or, just send them
a message.
Site Index | Topics | Archive | Help | Feedback | Media Archive | Premium Products | Mobile | RSS | Podcasts | Company Info | Advertising Media Kit | DJ Client Solutions
The Wall Street Journal Digital Network:
WSJ.com | Barron's Online | BigCharts | Virtual Stock Exchange | All Things Digital | MarketWatch Community
RealEstateJournal.com | Financial News Online | WSJ.com Small Business
MarketWatch
Copyright © 2008 MarketWatch, Inc. All rights reserved.
By using this site, you agree to the Terms of Service and Privacy Policy .
Key Challenges and Issues facing the World Carbon Nanotubes Market - MarketWatch
Intraday data provided by Interactive Data Real Time Services, a division of Interactive Data Corp. and subject to terms of use. Historical and current end-of-day data provided by Interactive Data Pricing and Reference Data. More information on NASDAQ traded symbols and their current financial status. Intraday data delayed 15 minutes for Nasdaq, and 20 minutes for other exchanges. Dow Jones Indexes(SM) from Dow Jones & Company, Inc. SEHK intraday data is provided by Comstock and is at least 60-minutes delayed. All quotes are in local exchange time. Real-time last sale data provided by NASDAQ.
*
*
*
* More
o BigCharts
o Virtual Stock Exchange
o FiLife.com
o WSJ Asia
o WSJ Europe
o WSJ Portuguese
o WSJ Spanish
o WSJ Chinese
o Financial News Online
SEARCH
Choose a quote match or "go" to get quote
*
*
*
*
*
*
*
*
*
*
Choose a topic to search news:
*
*
*
*
*
*
*
*
*
*
Stock Market Quote - Business News - Financial News
close
Welcome, please sign in.
My Portfolio • Community • VSE • Alerts
* Front Page
o News & Commentary
o Markets
o Mutual Funds & ETFs
o Personal Finance
o Technology
o Tools & Research
o My MarketWatch
o Community
o Video
*
* News & Commentary
*
* Columnists
*
* First Take
*
* Special Reports
o How to Buy
o Trading Strategies
o The Heat is On
o Power Crisis
o Digital Home
o Dubai
*
* Blogs
*
* Podcasts
*
* Industry News
o Technology
o Health Care
o Retail
o Automobiles
*
* Economy & Politics
o Fed
o The Election
*
* Newsletters
o Guru's Corner
o Directory
o Hulbert Financial Digest
*
* Election 2008
latest news
[APD] Air Products sees Q4 cont. ops of $1.24 to $1.26 a share
Key Challenges and Issues facing the World Carbon Nanotubes Market
Last update: 5:15 a.m. EDT Sept. 18, 2008
LONDON, UNITED KINGDOM, Sep 18, 2008 (MARKET WIRE via COMTEX) -- Reportlinker.com announces that a new market research report related to the Chemicals industry industry is available in its catalogue.
World Carbon Nanotubes Market
http://www.reportlinker.com/p092431/World-Carbon-Nanotubes-Market.html
This report analyzes the worldwide markets for Carbon Nanotubes in US$ Million. The major product segments analyzed are Single Walled Carbon Nanotubes, and Multi Walled Carbon Nanotubes.The major end use segments discussed are R&D Institutes/Laboratories, Electronics, Field Emission Devices, Composites, and Others (Predominantly Fuel Cells & Batteries). The report provides separate comprehensive analytics for the US, Europe, Asia-Pacific, and Rest of World. Annual forecasts are provided for each region for the period of 2001 through 2015. The report profiles 94 companies including many key and niche players worldwide such as Catalyx Nanotech Inc., Hyperion Catalysis International, Inc., ILJIN Nanotech Co., Ltd., Nanocyl S.A., Nanoledge, Raymor Industries, Inc., Rosseter Holdings Ltd., Shenzhen Nanotech Port Co., Ltd., SouthWest NanoTechnologies, Inc., Sun Nanotech Co., Ltd., and Unidym Inc. Market data and analytics are derived from primary and secondary research. Company profiles are mostly extracted from URL research and reported select online sources.
CARBON NANOTUBES MCP-1507
A GLOBAL STRATEGIC BUSINESS REPORT
CONTENTS
I. INTRODUCTION, METHODOLOGY & PRODUCT DEFINITIONS
Study Reliability and Reporting Limitations I-1
Disclaimers I-2
Data Interpretation & Reporting Level I-2
Quantitative Techniques & Analytics I-2
Product Definitions and Scope of Study I-3
Product Segments I-3
Single Walled Carbon Nanotubes I-3
Multi Walled Carbon Nanotubes I-4
End-Use Sectors I-4
R&D Institutes/Laboratories I-4
Electronics I-4
Field Emission Devices I-4
Composites I-4
Others End-Use Applications I-5
II. EXECUTIVE SUMMARY
1. Introduction to Nanotechnology II-1
Nanotechnology - An Overview II-1
Introduction II-1
The Coming of Nano-Age II-1
Expect the Unexpected II-1
A Conceptual Definition II-1
Commercial Applications of Nanotechnology II-2
Regional Analysis by Companies II-3
Table 1: Worldwide Nanotechnology Market (2004):
Distribution of Nanotechnology Based Establishments (Large
Companies, Subsidiaries/Joint Ventures, Small
Companies/Start Ups and Universities/Research Institutes) in
North America, Europe, and Asia (includes corresponding
Graph/Chart) II-3
Future Prospects II-3
2. Carbon Nanotubes - An Overview II-5
Carbon Nanotubes - A Huge Potential Market II-5
Escalating Demand II-5
Revenues On the Rise II-5
Cost Constraints to be Resolved II-5
Multi Walled Carbon Nanotubes Drive the Market II-6
Low Price - An Advantage II-6
Applications II-6
Single Walled Carbon Nanotubes - A Burgeoning Market II-6
Current and Future Applications II-6
Research Institutions - Exploiting New Applications and
Techniques II-7
Creation of Research Centers II-7
Key Research Centers II-7
Commercialization - Future Prospects for Carbon Nanotubes II-8
Reasons For Delay II-8
Future Scenario II-8
Emerging as Key Product in Various Applications II-8
Future Applications II-8
Partnership Agreements Spur the Market II-9
3. Market Trends and Issues II-10
Production Costs Surpass Potential Benefits II-10
Different Means to Surmount Low Production II-10
Innovation and Quality Drive Growth II-10
End-Users - Demand Variety Products II-10
Improved Production Methods II-10
Development of New Technologies II-11
Enhanced Production Techniques Offer Various Advantages II-11
Partnership Agreements Develop New Techniques and Products II-11
Exploitation of Resources II-11
Increase in Research & Development Activities II-12
Evolution of R&D Centers II-12
Private Startups and Research Institutions II-12
Single Walled Carbon Nanotubes - A Boon to the Market II-12
Reasons for Low Production II-13
Single Walled Carbon Nanotubes Perspective II-13
Multi Walled Carbon Nanotubes Play a Major Role II-13
End-Use Perspective II-13
Non-Volatile Memories II-13
Field Emission Devices II-14
Composites II-14
Batteries and Fuel Cell Applications II-14
Sensors II-14
Other Applications II-14
Investment Issues and High Costs Setback Rapid Commercialization II-15
Acquisition of Intellectual Property Rights II-15
Patents Offer Multiple Advantages II-15
Companies and Research Institutions Holding Patents II-15
Patents - Analysis by End-Use Sector II-16
Challenging Issues II-16
4. Global Market Analysis II-17
Analysis by Geographic Region II-17
Analysis by Product Segment II-17
Analysis by End-Use Sector II-17
Carbon Nanotubes II-17
Single Walled Carbon Nanotubes II-17
Multi Walled Carbon Nanotubes II-18
5. Product Overview & Processing Techniques II-19
Overview & Definition II-19
History II-19
Introduction II-19
Properties II-20
Uses II-20
Product Categories II-20
Single Walled Carbon Nanotube II-20
Overview II-20
Properties II-20
Production Processes II-21
Multi Walled Carbon Nanotubes II-21
Overview II-21
Performs Various Functions II-21
Single Walled Carbon Nanotubes Vs Multi Walled Carbon Nanotubes II-21
Processing Techniques II-22
Laser Ablation II-22
Arc Discharge or Pulsed laser Vaporization II-22
Chemical Vapor Deposition II-22
Disadvantage II-22
Gas-Phase Processing II-22
6. End-Use Sectors - An Overview II-23
Applications II-23
Budding Markets II-23
End-Use Sectors II-23
R&D Institutes/Laboratories - Everlasting End-User II-23
Field Emission Devices - Emerging Potential Market II-24
Field Emission Cathode II-24
X-ray II-24
Field Emission Display II-24
Electronics II-25
Applications II-25
Carbon Nanotubes Expected to Replace Existing Transistors II-25
Composites II-25
Applications II-25
Plastics II-26
Health and Life Sciences II-26
Others II-26
Nonvolatile Memory Devices II-27
Fuel Cells II-27
Batteries II-27
Sensors II-27
Super Capacitors II-28
Television II-28
Biomechanical Applications II-28
Nanowires II-28
End-Use Applications - Commercialization Time Grid II-28
7. Research and Development II-29
Carbon Nanotubes to Assist Cancer Treatment II-29
Carbon Nanotubes' Study at Notre Dame University II-29
NanoSensors Tests Carbon Nanotubes Devices II-29
Encapsulation and Stabilization of Beta-Carotene in Carbon
Nanotubes II-29
Reverse Engineering of Carbon Nanotubes II-30
Researchers Produce Vertical Single and Double Walled Carbon
Nanotubes II-30
NanoHand Project for Automated Handling of Carbon Nanotubes II-30
8. Technological Developments II-32
IBM Develops an Evaluation Technique for Carbon Nanotubes II-32
Novel Method for Identical Single Wall Carbon Nanotubes II-32
Caltech Researchers Discover New Property of Carbon Nanotubes II-32
Nantero Develop Method to Use Carbon Nanotubes in Wafer
Fabrication Facilities II-32
Samsung to Utilize Carbon Nanotubes in LCD TVs II-33
Innovative Techniques to Employ Carbon Nanotubes in Electronic
Devices II-33
Bayer MaterialScience Introduces Baytubes II-33
Innovative Carbon Nanotubes Devices to Detect Gene Mutations II-33
MIT Researchers Manipulate Carbon Nanotubes II-34
Motorola Builds Sensors Based on Carbon Nanotubes II-34
Double-Walled Carbon Nanotubes for Power-Saving Display Panels II-34
MIT Researchers Develop Carbon Nanotube Ultracapacitors II-34
Efficient Manufacturing Process for Carbon Nanotubes II-35
Nanocyl Introduces Innovative Industrial Reactor to Produce
Carbon Nanotubes II-35
University of Texas Launches a New Method to Manufacture
Nanotube Sheets II-35
University of California Designs Innovative Process to
Manufacture Supercapacitors II-35
Johnson Space Center Develops New Method to Align and Assemble
Single-Wall Carbon Nanotubes II-35
Seoul University and Sungkyunkwan University Introduces a New
Separation Process II-36
Ames Research Center Rolls Out New Process for Manufacturing
Carbon Nanotubes II-36
Nanoledge Launched New Technique for Developing Fibers using
Carbon Nanotubes II-36
California Institute of Technology Rolls Out New Technique II-36
IBM Pioneers New Method to Increase Efficiency of Light Using
Carbon Nanotubes II-36
9. Product Innovations/Introductions II-37
Nanocyl Displays Extensive Products II-37
Ahwahnee Technology Debuts Carbon Nanotubes Innovation Kit(tm) II-37
Nanomix Rolls Out Universal Detection Platform Based on
Sensation(tm) Nanotubes II-37
Superconductivity Technology Center Develops Single Walled
Carbon Nanotubes II-37
Johnson Space Center Uses Diamond Coated Carbon Nanotubes to
Develop Field Emission Cathodes II-38
Pacific Fuel Cell Purchases Chemical Vapor Deposition System
to Manufacture Carbon Nanotubes II-38
Ames Research Center Engineers Carbon Nanotube Based Gears II-38
University of Illinois Introduces Glucose Sensor Using Carbon
Nanotubes II-38
Rensselaer Polytechnic Institute Develops Carbon Nanotube Brushes II-38
Zyvex Unveils New Product Family II-39
Researchers at University of North Carolina Uses Carbon
Nanotubes in Designing X-Ray II-39
NASA's Johnson Space Center to Develop Electrodes from Carbon
Nanotubes II-39
Ames Research Center Introduces a Range of Multi Walled Carbon
Nanotubes II-39
University of Texas Uses Carbon Nanotubes Develop Transparent
Ribbons II-39
Nanocyl Introduces New Product to its Carbon Nanotubes Product
Line II-39
Tailored Materials Debuts New NanoCarbonMats II-40
Researchers at University of California and University of
Clemson (S.C.) Identifies Y-Shaped Nanotubes for Transistors II-40
10. Recent Industry Activity II-41
Bayer Material Science AG Signs an Agreement with Brenntag
Schweizerhall AG II-41
AIXTRON Takes Over Nano Instruments II-41
Zeox Acquires Stake in Nano Clays II-41Catalytic Materials Forms Joint Venture with Catalyx Inc II-41
Arrowhead Research Acquires Carbon Nanotechnologies II-41
Brenntag Collaborates with Buehler II-42
SouthWest NanoTechnologies to Build a New Plant II-42
Bayer Material Science to Establish Second Production Line II-42
Unidym Enters into a Strategic Alliance II-42
Raymor Industries Expands Presence in Asia II-42
Raymor to Provide Single-Walled Carbon Nanotubes II-43
Mitsui and Rice Collaborate with Team of Scientists II-43
GSI Creos to Develop Carbon Nanotubes II-43
Los Alamos Forms Joint Venture with CNT Technologies II-43
Nanocyl Joins Forces with Vantage Resin Systems II-43
Raymor Starts C-SWNT Production Using New Technique II-44
Keithley's Model 4200 Meets New IEEE 1650TM-2005 Standard II-44
NanoPolaris Changes Name to Unidym II-44
NanoPolaris Acquires Unidym II-44
CNT Technologies Selects CVD Equipment II-44
Bayer MaterialScience and Bayer Technology Services Collaborate II-44
Arkema Expands Capacity II-45
Nano-Proprietary Inks Pact to Form Venture with Da Ling II-45
Shimane Masuda Electronics and Nano-Proprietary Enters into
Agreement II-45
Raymor Nanotech Initiates Carbon Nanotube Plant II-45
Nantero Collaborates with ON Semiconductor II-45
SouthWest NanoTechnologies Acquires License from NEC II-45
NanoDynamics Receives Patent on Solid Oxide Fuel Cell Structures II-45
CSIRO Collaborates With University of Texas Dallas II-46
AP&C Bags EADS Order for Single Walled Carbon Nanotubes II-46
Tailored Materials Establishes New Manufacturing Facility II-46
INSEQ Inks Agreement with Cheap Tubes II-46
Pacific Fuel Cell Obtains Rights to Carbon Nanotube Membrane
Electrode Assembly II-47
Raymor Industries Teams Up with Institute National de la
Recherche Scientifique II-47
NanoDynamics Signs Agreement with Nanocyl II-47
Carbon Nanotechnologies Expands Pilot Plant Facility II-47
ObjectSoft Signs Agreement with RES II-47
Carbon Nanotechnologies Merges with C Sixty II-47
Los Alamos National Laboratory Inks Agreement with Carbon
Designs II-47
Nantero and Brewer Science Sign Agreement II-48
Carbon Nanotechnologies Acquires 30 Patents II-48
11. Focus on Select Global Players II-49
Catalyx Nanotech Inc. (USA) II-49
Hyperion Catalysis International, Inc. (USA) II-49
ILJIN Nanotech Co., Ltd. (South Korea) II-49
Nanocyl S.A. (Belgium) II-49
Nanoledge (France) II-50
Raymor Industries, Inc. (Canada) II-51
Rosseter Holdings Ltd. (Cyprus) II-51
Shenzhen Nanotech Port Co., Ltd. (China) II-51
SouthWest NanoTechnologies, Inc. (USA) II-52
Sun Nanotech Co., Ltd. (China) II-52
Unidym Inc. (USA) II-52
12. Focus on Select R&D Institutes/Laboratories II-53
Ames Research Center (USA) II-53
California Institute of Technology (USA) II-53
GE Global Research (USA) II-53
IBM Research (USA) II-54
Johnson Space Center (USA) II-54
Motorola Labs (USA) II-54
Philips Research (The Netherlands) II-55
Samsung Advanced Institute of Technology (South Korea) II-55
University of California (USA) II-55
University of Texas (USA) II-56
13. Global Market Perspective II-57
Table 2: World Recent Past, Current & Future Analysis for
Carbon Nanotubes by Geographic Region - US, Europe,
Asia-Pacific (including Japan), and Rest of World Markets
Independently Analyzed with Annual Sales Figures in US$
Million for Years 2001 through 2010 (includes corresponding
Graph/Chart) II-57
Table 3: World Long-term Projections for Carbon Nanotubes by
Geographic Region - US, Europe, Asia-Pacific (including
Japan), and Rest of World Markets Independently Analyzed with
Annual Sales Figures in US$ Million for Years 2011 through
2015 (includes corresponding Graph/Chart) II-58
Table 4: World 10-Year Perspective for Carbon Nanotubes by
Geographic Region - Percentage Breakdown of Dollar Sales for
US, Europe, Asia-Pacific (including Japan), and Rest of World
Markets for Years 2003, 2008 & 2012 (includes corresponding
Graph/Chart) II-59
Table 5: World Recent Past, Current & Future Analysis for
Single Walled Carbon Nanotubes by Geographic Region - US,
Europe, Asia-Pacific (including Japan), and Rest of World
Markets Independently Analyzed with Annual Sales Figures in
US$ Million for Years 2001 through 2010 (includes
corresponding Graph/Chart) II-60
Table 6: World Long-term Projections for Single Walled Carbon
Nanotubes by Geographic Region - US, Europe, Asia-Pacific
(including Japan), and Rest of World Markets Independently
Analyzed with Annual Sales Figures in US$ Million for Years
2011 through 2015 (includes corresponding Graph/Chart) II-61
Table 7: World 10-Year Perspective for Single Walled Carbon
Nanotubes by Geographic Region - Percentage Breakdown of
Dollar Sales for US, Europe, Asia-Pacific (including Japan),
and Rest of World Markets for Years 2003, 2008 & 2012
(includes corresponding Graph/Chart) II-62
Table 8: World Recent Past, Current & Future Analysis for
Multi Walled Carbon Nanotubes by Geographic Region - US,
Europe, Asia-Pacific (including Japan), and Rest of World
Markets Independently Analyzed with Annual Sales Figures in
US$ Million for Years 2001 through 2010 (includes
corresponding Graph/Chart) II-63
Table 9: World Long-term Projections for Multi Walled Carbon
Nanotubes by Geographic Region - US, Europe, Asia-Pacific
(including Japan), and Rest of World Markets Independently
Analyzed with Annual Sales Figures in US$ Million for Years
2011 through 2015 (includes corresponding Graph/Chart) II-64
Table 10: World 10-Year Perspective for Multi Walled Carbon
Nanotubes by Geographic Region - Percentage Breakdown of
Dollar Sales for US, Europe, Asia-Pacific (including Japan),
and Rest of World Markets for Years 2003, 2008 & 2012
(includes corresponding Graph/Chart) II-65
Table 11: World Recent Past, Current & Future Analysis for
Carbon Nanotubes by End-Use Sector - R&D Institutes/
Laboratories, Electronics, Field Emission Devices, Composites,
and Other End-Use Sector (inclusive of Fuel Cells & Batteries)
Markets Independently Analyzed with Annual Sales Figures in
US$ Million for Years 2001 through 2010 (includes
corresponding Graph/Chart) II-66
Table 12: World Long-term Projections for Carbon Nanotubes by
End-Use Sector - R&D Institutes/Laboratories, Electronics,
Field Emission Devices, Composites, and Other End-Use Sector
(inclusive of Fuel Cells & Batteries) Markets Independently
Analyzed with Annual Sales Figures in US$ Million for Years
2011 through 2015(includes corresponding Graph/Chart) II-67
Table 13: World 10-Year Perspective for Carbon Nanotubes by
End-Use Sector - Percentage Breakdown of Dollar Sales for R&D
Institutes/Laboratories, Electronics, Field Emission Devices,
Composites, and Other End-Use Sector (inclusive of Fuel Cells
& Batteries) Markets for Years 2003, 2008 & 2012 (includes
corresponding Graph/Chart) II-68
Table 14: World Recent Past, Current & Future Analysis for
Single Walled Carbon Nanotubes by End-Use Sector - R&D
Institutes/Laboratories, Electronics, Field Emission Devices,
Composites, and Other End-Use Sector (inclusive of Fuel Cells
& Batteries) Markets Independently Analyzed with Annual Sales
Figures in US$ Million for Years 2001 through 2010 (includes
corresponding Graph/Chart) II-69
Table 15: World Long-term Projections for Single Walled Carbon
Nanotubes by End-Use Sector - R&D Institutes/ Laboratories,
Electronics, Field Emission Devices, Composites, and Other
End-Use Sector (inclusive of Fuel Cells & Batteries) Markets
Independently Analyzed with Annual Sales Figures in US$
Million for Years 2011 through 2015 (includes corresponding
Graph/Chart) II-70
Table 16: World 10-Year Perspective for Single Walled Carbon
Nanotubes by End-Use Sector - Percentage Breakdown of Dollar
Sales for R&D Institutes/Laboratories, Electronics, Field
Emission Devices, Composites, and Other End-Use Sector
(inclusive of Fuel Cells & Batteries) Markets for Years 2003,
2008 & 2012 (includes corresponding Graph/Chart) II-71
Table 17: World Recent Past, Current & Future Analysis for
Multi Walled Carbon Nanotubes by End-Use Sector - R&D
Institutes/Laboratories, Electronics, Field Emission Devices,
Composites, and Other End-Use Sector (inclusive of Fuel Cells
& Batteries) Markets Independently Analyzed with Annual Sales
Figures in US$ Million for Years 2001 through 2010 (includes
corresponding Graph/Chart) II-72
Table 18: World Long-term Projections for Multi Walled Carbon
Nanotubes by End-Use Sector - R&D Institutes/ Laboratories,
Electronics, Field Emission Devices, Composites, and Other
End-Use Sector (inclusive of Fuel Cells & Batteries) Markets
Independently Analyzed with Annual Sales Figures in US$
Million for Years 2011 through 2015(includes corresponding
Graph/Chart) II-73
Table 19: World 10-Year Perspective for Multi Walled Carbon
Nanotubes by End-Use Sector - Percentage Breakdown of Dollar
Sales for R&D Institutes/Laboratories, Electronics, Field
Emission Devices, Composites, and Other End-Use Sector
(inclusive of Fuel Cells & Batteries) Markets for Years 2003,
2008 & 2012 (includes corresponding Graph/Chart) II-74
III. MARKET
1. The United States III-1
A.Market Analysis III-1
Current and Future Analysis III-1
Nanotechnology - An Overview III-1
Table 20: Nanotechnology Market in the US (2004):
Percentage Breakdown Depicting Distribution of
Nanotechnology Based Companies by State - California,
Massachusetts, New York, Texas, Pennsylvania, Illinois,
Ohio, New Jersey, Colorado, New Mexico, Florida, Michigan,
Arizona, Minnesota, North Carolina, Washington, Maryland,
Nevada, Tennessee, Wisconsin,Connecticut, Virginia, and
Other States (includes corresponding Graph/Chart) III-2
Carbon Nanotubes Market III-3
Issues and Trends III-3
Research Institutes and their Involvement in DevelopingCarbon Nanotubes III-3
Technological Developments III-4
Product Launches/Developments III-6
Strategic Corporate Developments III-9
Select Players III-12
Catalyx Nanotech Inc. III-12
Hyperion Catalysis International, Inc. III-13
SouthWest NanoTechnologies, Inc. III-13
Unidym Inc. III-13
Research Institutions III-14
Ames Research Center III-14
California Institute of Technology III-14
GE Global Research III-14
IBM Research III-15
Johnson Space Center III-15
Motorola Labs III-16
University of California III-16
University of Texas III-17
B.Market Analytics III-17
Table 21: US Recent Past, Current & Future Analysis for
Carbon Nanotubes by Product Segment - Single walled Carbon
Nanotube and Multi walled Carbon Nanotube Markets
Independently Analyzed with Annual Sales Figures in US$
Million for Years 2001 through 2010 (includes corresponding
Graph/Chart) III-17
Table 22: US Long-term Projections for Carbon Nanotubes by
Product Segment - Single walled Carbon Nanotube and Multi
walled Carbon Nanotube Markets Independently Analyzed with
Annual Sales Figures in US$ Million for Years 2011 through
2015 (includes corresponding Graph/Chart) III-18
Table 23: US 10-Year Perspective for Carbon Nanotubes by
Product Segment - Percentage Breakdown of Dollar Sales for
Single walled Carbon Nanotubes and Multi walled Carbon
Nanotube Markets for Years 2003, 2008 & 2012 III-18
2. Europe III-19
A.Market Analysis III-19
Current and Future Analysis III-19
Nanotechnology - An Overview III-19
Carbon Nanotubes Market III-19
Focus on Select Market III-20
The United Kingdom III-20
Key Academic Institutes in Nano Research III-20
Technological Developments III-20
Product Launches/Developments III-21
Strategic Corporate Developments III-21
Select Players / R&D Institutions III-22
Nanocyl S.A. (Belgium) III-22
Nanoledge (France) III-23
Rosseter Holdings Ltd. (Cyprus) III-23
Philips Research (The Netherlands) III-24
B.Market Analytics III-25
Table 24: European Recent Past, Current & Future Analysis
for Carbon Nanotubes by Product Segment - Single walled
Carbon Nanotubes and Multi walled Carbon Nanotubes Markets
Independently Analyzed with Annual Sales Figures in US$
Million for Years 2001 through 2010 (includes corresponding
Graph/Chart) III-25
Table 25: European Long-term Projections for Carbon
Nanotubes by Product Segment - Single walled Carbon Nanotube
and Multi walled Carbon Nanotube Markets Independently
Analyzed with Annual Sales Figures in US$ Million for Years
2011 through 2015 (includes corresponding Graph/Chart) III-26
Table 26: European 10-Year Perspective for Carbon Nanotubes
by Product Segment - Percentage Breakdown of Dollar Sales
for Single walled Carbon Nanotubes and Multi walled Carbon
Nanotube Markets for Years 2003, 2008 & 2012 III-26
3. Asia-Pacific III-27
A.Market Analysis III-27
Current and Future Analysis III-27
Nanotechnolgy - An Overview III-27
Carbon Nanotubes III-27
Overview III-27
Focus on Select Markets III-28
Australia - Part of a Tiny Revolution III-28
Nanotechnology - An Overview III-28
Challenges for Nanotechnology Development in Australia III-28
Carbon Nanotubes Market III-28
Future Applications III-29
China III-29
Nanotechnology - An Overview III-29
Government Takes the R&D Initiative III-29
Chinese Agencies Involved in Nanotech III-30
Nation's First Nanometer Technology Industrial Base Set
up in Tianjin III-30
Carbon Nanotubes Market III-30
India III-30
Japan III-31
Nanotechnology - An Overview III-31
Carbon Nanotubes Market III-31
Nanotechnology Consortium - An Interface for Technology
Transfer III-32
Future Applications III-32
South Korea III-33
Nanotechnology - An Overview III-33
Ministry of Science & Technology Takes Initiative for
Nanotech Funding III-33
Nanotech R&D Efforts III-33
Carbon Nanotubes Market III-33
Technological Development III-33
Strategic Corporate Developments III-33
Select Players / R&D Institutions III-35
ILJIN Nanotech Co., Ltd. (South Korea) III-35
Shenzhen Nanotech Port Co., Ltd. (China) III-35
Sun Nanotech Co., Ltd. (China) III-35
Samsung Advanced Institute of Technology (South Korea) III-36
B.Market Analytics III-36
Table 27: Asia-Pacific (including Japan) Recent Past,
Current & Future Analysis for Carbon Nanotubes by Product
Segment - Single walled Carbon Nanotubes and Multi walled
Carbon Nanotubes Markets Independently Analyzed with Annual
Sales Figures in US$ Million for Years 2001 through 2010
(includes corresponding Graph/Chart) III-36
Table 28: Asia-Pacific (including Japan) Long-term
Projections for Carbon Nanotubes by Product Segment - Single
walled Carbon Nanotube and Multi walled Carbon Nanotube
Markets Independently Analyzed with Annual Sales Figures in
US$ Million for Years 2011 through 2015 (includes
corresponding Graph/Chart) III-37
Table 29: Asia-Pacific (including Japan) 10-Year Perspective
for Carbon Nanotubes by Product Segment - Percentage
Breakdown of Dollar Sales for Single walled Carbon
Nanotubes and Multi walled Carbon Nanotube Markets for
Years 2003, 2008 & 2012 III-37
4. Rest of World III-38
A.Market Analysis III-38
Current and Future Analysis III-38
Focus on Select Markets III-38
Canada III-38
Universities and Government Agencies Involved in Carbon
Nanotubes Research III-38
Israel III-38
Carbon Nanotubes Market III-39
Strategic Corporate Developments III-39
Raymor Industries, Inc. - A Major Canadian Player III-40
B.Market Analytics III-41
Table 30: Rest of World Recent Past, Current & Future
Analysis for Carbon Nanotubes by Product Segment - Single
walled Carbon Nanotubes and Multi walled Carbon Nanotubes
Markets Independently Analyzed with Annual Sales Figures in
US$ Million for Years 2001 through 2010 (includes
corresponding Graph/Chart) III-41
Table 31: Rest of World Long-term Projections for Carbon
Nanotubes by Product Segment - Single walled Carbon Nanotube
and Multi walled Carbon Nanotube Markets Independently
Analyzed with Annual Sales Figures in US$ Million for Years
2011 through 2015(includes corresponding Graph/Chart) III-42
Table 32: Rest of World 10-Year Perspective for Carbon
Nanotubes by Product Segment - Percentage Breakdown of
Dollar Sales for Single walled Carbon Nanotube and Multi
walled Carbon Nanotube Markets for Years 2003, 2008 & 2012 III-42
IV. COMPETITIVE LANDSCAPE
To order this report:
World Carbon Nanotubes Market
http://www.reportlinker.com/p092431/World-Carbon-Nanotubes-Market.html
More market research reports here!
Contacts:
Reportlinker.com
Nicolas
US: (805) 652-2626 or Int: +1-805-652-2626
Email: nbo@reportlinker.com
SOURCE: Reportlinker.com
mailto:nbo@reportlinker.com
Copyright 2008 Market Wire, All rights reserved. End of Story
Top stories
5:11 AM today U.S. futures in tight range before Bernanke, Paulson
57 minutes ago Fed relaxes restrictions on banking investments
5:18 AM today Bristol-Myers lifts bid for ImClone, plans proxy fight for board
After the Bell E-newsletter
Receive a daily email with closing levels of the major indexes and important closing market news and commentary.
loading
Sign up
Privacy policy
Most Popular
READ
E-MAILED
EDITOR'S PICK
* Echoes of Iraq in Bush's handling of mortgage 'surge'
* Markets' problems haven't deterred corporate insiders
* Greed goes underground on Wall Street
* The end of Wall Street may mean less profit for Goldman, Morgan
* Hong Kong, Shanghai stocks retreat after 2-day rally
* Oil's $16 gain makes history, but its true test is yet to come
* U.S. futures in tight range before Bernanke, Paulson
* Embittered by bailout? Try Zen Millionaire's 12-step meditation
* Regulator may press WaMu to sell to consortium: report
* Airlines, retailers, banks decline in downbeat London
* Echoes of Iraq in Bush's handling of mortgage 'surge'
* Embittered by bailout? Try Zen Millionaire's 12-step meditation
* The end of Wall Street may mean less profit for Goldman, Morgan
* Pandora radio fights unjust royalty hikes
* Taro Aso selected as Japan's next prime minister
* Markets' problems haven't deterred corporate insiders
* 'Vulture' investors come home to roost in a troubled market
* Greed goes underground on Wall Street
* Brave new world for financial markets
* Tax Brackets and Tables for 2008
* U.S. futures in tight range before Bernanke, Paulson
* Fed relaxes restrictions on banking investments
* Bristol-Myers lifts bid for ImClone, plans proxy fight for board
* Echoes of Iraq in Bush's handling of mortgage 'surge'
* Oil's $16 gain makes history, but its true test is yet to come
Get the Latest MarketWatch News >>
PARTNER CENTER
Making friends on our stories?
Add them as a friend so you can keep in touch
and see what they are up to. Or, just send them
a message.
Site Index | Topics | Archive | Help | Feedback | Media Archive | Premium Products | Mobile | RSS | Podcasts | Company Info | Advertising Media Kit | DJ Client Solutions
The Wall Street Journal Digital Network:
WSJ.com | Barron's Online | BigCharts | Virtual Stock Exchange | All Things Digital | MarketWatch Community
RealEstateJournal.com | Financial News Online | WSJ.com Small Business
MarketWatch
Copyright © 2008 MarketWatch, Inc. All rights reserved.
By using this site, you agree to the Terms of Service and Privacy Policy .
Key Challenges and Issues facing the World Carbon Nanotubes Market - MarketWatch
Intraday data provided by Interactive Data Real Time Services, a division of Interactive Data Corp. and subject to terms of use. Historical and current end-of-day data provided by Interactive Data Pricing and Reference Data. More information on NASDAQ traded symbols and their current financial status. Intraday data delayed 15 minutes for Nasdaq, and 20 minutes for other exchanges. Dow Jones Indexes(SM) from Dow Jones & Company, Inc. SEHK intraday data is provided by Comstock and is at least 60-minutes delayed. All quotes are in local exchange time. Real-time last sale data provided by NASDAQ.
Subscribe to:
Posts (Atom)